|
[Sponsors] |
August 30, 2011, 04:41 |
fluent text command doesnt show all options!
|
#1 |
Senior Member
Mohammad
Join Date: Feb 2010
Location: Shiraz, Iran
Posts: 108
Rep Power: 16 |
hi all,
I wanted to write a journal file for fluent to do some changes in case and run them. so I write text-user interface commands in a text file and read it as a journal. but now I want to change some turbulence parameters like the wall treatment options in k-e and RSM; but I cant find how can I set these parameters in text UI? in fluent help it is mentioned that there are many options in /define/models/viscous but when I check in fluent window, it doesn't show all options and I can just choose model of turbulence with no other options! there may be a command to activate all options in text mode, but I wasn't able to find it. I use fluent 6.3.26x64 in Linux and the case is a 2ddp case. thank you in advance, mohammad |
|
August 30, 2011, 05:37 |
|
#2 |
Senior Member
|
Hi mohamad,
in /define/models/viscous, first enable the turbulence model then for both ke and RSM the near wall treatment is available in /define/models/viscous; I checked that for a 3ddp case; otherwise, you can also use other journal file preparation method; you can use file->write->start journal, then do what ever you want in GUI and at last in file->write->stop journal, terminate that. Bests,
__________________
Amir |
|
August 30, 2011, 06:38 |
|
#3 |
Senior Member
Mohammad
Join Date: Feb 2010
Location: Shiraz, Iran
Posts: 108
Rep Power: 16 |
oh you're right Amir!! it was a foolish mistake and also bad user-interface of FLUENT!!
thanks |
|
March 13, 2017, 00:56 |
Initiating PBM
|
#4 | |
New Member
Obed
Join Date: Mar 2017
Posts: 5
Rep Power: 9 |
Quote:
You really saved my day with this. Initiating the PBM was giiving me a bloody nose |
||
Tags |
text user interface, turbulence |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Transport mesh from ICEM CFD, to Fluent, to Sysnoise | Wieland | FLUENT | 2 | April 15, 2012 07:28 |
Fluent 6.3.26 vs 12.1 and partition method | Anorky | FLUENT | 0 | April 27, 2010 11:55 |
[ICEM] How to Define a Line separating two Meshes/Regions to not show up as "wall" in Fluent | enigma | ANSYS Meshing & Geometry | 7 | April 6, 2009 13:20 |
OpenFOAM vs. Fluent & CFX | marco | Main CFD Forum | 81 | March 31, 2009 15:22 |
solving ocean wave with Fluent or CFX? | gholamghar | Main CFD Forum | 1 | March 21, 2009 13:49 |