|
[Sponsors] |
New High-Performance FEA Workstation (mostly ABAQUS/Standard) |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 8, 2023, 12:33 |
New High-Performance FEA Workstation (mostly ABAQUS/Standard)
|
#1 |
Member
|
Hi all,
I am working on configuring a new dedicated FEA rig. The budget is 10-15k USD, but given organizational constraints, we are limited to the Dell Precision 7920 or 7960 lines. We are also license constrained for ABAQUS and can only run on a maximum of 12 threads at a time. Given these restrictions I have been looking at the Xeon W series processors (e.g., w5-3425 with 30MB Cache, 12 cores, 24 threads, 3.2GHz to 4.6GHz). This thread seems to concur with that conclusion (thanks, flotus1), but it has been a few months. Certainly open to reconsidering Xeon Gold (e.g., 6226R in a 7920) if there are advantages. Here is an example configuration on the Dell website: link The above has 256GB DDR5 memory (4x64GB, 4800MHz, RDIMM ECC). We are also considering going all-out on 8x64GB DDR5, although I'm not sure that merits the extra 5k USD. Any input greatly appreciated! ---
|
|
August 8, 2023, 14:35 |
|
#2 |
Super Moderator
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,400
Rep Power: 47 |
The new Xeon-W CPUs have some seriously fast cores. I don't think it's worth looking for earlier generations. For an OEM workstation, the 3425 is a good choice.
If you are set on 256GB of RAM, better get the 8x32GB configuration. It costs the same as 4x64GB, but you get to use all 8 memory channels of the CPU. I have to say that I'm impressed by Dell. Charging 10000$ for 512GB of RAM could make Apple jealous. It looks like you have a bunch of "fast" mechanical hard drives in your configuration. I would probably try to get rid of those in favor of SSDs. Compared to even basic NVMe SSDs, they are loud and slow. And definitely not worth the 470$ Dell charges. If this is about write endurance for some reason: in theory, SSDs can fill this gap as well. Though you would need to contact sales directly for that. Dell's nondescript SSD "classes" are no help here whatsoever. I have used Samsung PM1735 for scratch space for Permas in HP workstations. They are fast, relatively cheap for what they offer (currently 1400€ for the 12.8TB model), and have plenty of write endurance. Last edited by flotus1; August 10, 2023 at 03:40. |
|
August 8, 2023, 16:49 |
|
#3 | |
Senior Member
Join Date: Jun 2011
Posts: 199
Rep Power: 14 |
Quote:
|
||
August 11, 2023, 08:51 |
|
#4 | ||
Member
|
Thanks, flotus1! I will revise the ram configuration and swap in NVMe SSDs as recommended.
Quote:
Quote:
|
|||
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
General recommendations for CFD hardware [WIP] | flotus1 | Hardware | 18 | February 29, 2024 12:48 |
Workstation Suggestions For A Newbie | mrtcnsmgr | Hardware | 1 | February 22, 2023 01:13 |
CPU for Flow3d | mik_urb | Hardware | 4 | December 4, 2022 22:06 |
General purpose FEA for high school students? | soccerrprp | Main CFD Forum | 0 | March 24, 2010 14:20 |
PC vs. Workstation | Tim Franke | Main CFD Forum | 5 | September 29, 1999 15:01 |