Simulation number limit

dahmen · April 29, 2013, 09:21

Hallo every body
I would ask u about the number of simulations limit in one PC, because for me it is limited on eight cases only, above that my license will be failed.
How to grow up this number.

julien.decharentenay · April 29, 2013, 18:58

Can you be more specific? You employed the word "license" in your post - which seems to indicate that you are using a commercial software.

In all likelyhood, you have only purchase 8 seats of your software - which allows you to run 8 simulations...

Could you nominate the software you are using? It might be a good idea to ask your question to the software support.

dahmen · April 30, 2013, 04:36

Thank u Mr. julien
I'm actually using HP-Z400 station, and if i use more than 8 cases of simulation the additional case can't run, and a message appear in the screan told me that the license can't allow me this action.

julien.decharentenay · April 30, 2013, 21:10

Which software are you using?

dahmen · May 5, 2013, 05:40

sorry I thought that u talk about the hardware.
But the software that I use is Win7-64bits

April 29, 2013, 09:21	Simulation number limit	#1
dahmen New Member adam Join Date: Apr 2013 Posts: 9 Rep Power: 13	Hallo every body I would ask u about the number of simulations limit in one PC, because for me it is limited on eight cases only, above that my license will be failed. How to grow up this number.

April 29, 2013, 18:58		#2
julien.decharentenay Senior Member Julien de Charentenay Join Date: Jun 2009 Location: Australia Posts: 231 Rep Power: 17	Can you be more specific? You employed the word "license" in your post - which seems to indicate that you are using a commercial software. In all likelyhood, you have only purchase 8 seats of your software - which allows you to run 8 simulations... Could you nominate the software you are using? It might be a good idea to ask your question to the software support. __________________ --- Julien de Charentenay

April 30, 2013, 04:36	re-question	#3
dahmen New Member adam Join Date: Apr 2013 Posts: 9 Rep Power: 13	Thank u Mr. julien I'm actually using HP-Z400 station, and if i use more than 8 cases of simulation the additional case can't run, and a message appear in the screan told me that the license can't allow me this action.

April 30, 2013, 21:10		#4
julien.decharentenay Senior Member Julien de Charentenay Join Date: Jun 2009 Location: Australia Posts: 231 Rep Power: 17	Which software are you using? __________________ --- Julien de Charentenay

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mesh file for flow over a circular cylinder	Ardalan	Main CFD Forum	7	December 15, 2020 13:06
compressible flow in turbocharger	riesotto	OpenFOAM	50	May 26, 2014 01:47
Stable boundaries	marcoymarc	CFX	33	March 13, 2013 06:39
(Ask) Running Simulation on big number of Nodes	Munggang	FLUENT	0	March 25, 2012 20:26
Low-Reynolds number simulation	cfd_newbie	FLUENT	0	August 17, 2007 12:43

May 5, 2013, 05:40		#5
dahmen New Member adam Join Date: Apr 2013 Posts: 9 Rep Power: 13	sorry I thought that u talk about the hardware. But the software that I use is Win7-64bits