|
[Sponsors] |
November 9, 2013, 22:36 |
Need advice for Meshing Software
|
#1 |
New Member
Abhinav
Join Date: Mar 2011
Posts: 17
Rep Power: 15 |
I am currently using Gambit for Meshing. Because of discontinuation of Gambit, I am looking for a new Meshing software like Gambit. Most of my research work is related to Linear Cascade. I am not sure if there is any software like Gambit. I looked at ICEM, Pointwise, but all of my previous meshes are in DBS format. Kindly advice.
|
|
November 15, 2013, 09:26 |
|
#2 |
New Member
ethen
Join Date: Jun 2012
Posts: 12
Rep Power: 13 |
hypermesh,tgrid,ansys-meshing,etc
|
|
November 15, 2013, 12:48 |
Please use ADO's automatic mesh software
|
#3 |
New Member
California
Join Date: Sep 2013
Posts: 4
Rep Power: 12 |
proprietary automatic elliptic mesh generator can quickly generate 2D or 3D high-quality (in terms of orthogonality angle, expansion factor, and aspect ratio) multi-block structured hexahedral grids featured with boundary orthogonality, local clustering around bodies, and complete continuity at block-to-block interfaces. Such hexahedral grids especially allow for the accurate CFD prediction of complex flow in the boundary layers and sub-layers adjacent to the wall surfaces. These grids are particularly useful and feasible for blood pumps where flow patterns in tiny blade tip clearances and annular fluid gaps need to be revealed with very refined high-quality mesh. With the same number of grid elements, a structured hexahedral grid can provide far more accurate solutions than those unstructured tetrahedral grids. A structured grid with hexahedral elements is also more desirable for application in geometric shape optimization than an unstructured grid with tetrahedral cells.
Our advanced automatic elliptic mesh generator can generate the mesh with formats compatible with lead CFD software such as ANSYS-FLUENT, ANSYS-CFX and STAR-CD etc. It can be applied to any types of turbomachinery, medical devices or industrial products. http://www.advanceddo.com/mesh_generation.html |
|
November 21, 2013, 05:34 |
|
#4 |
Member
Join Date: Oct 2012
Posts: 46
Rep Power: 13 |
You can try CUBIT. It is a commercial sotware, but its more or less same as Gambit.
|
|
November 22, 2013, 00:46 |
CUBIT & Gambit can only generate the Tetrahedral elements grid
|
#5 |
New Member
California
Join Date: Sep 2013
Posts: 4
Rep Power: 12 |
CUBIT & Gambit can only generate the Tetrahedral elements grids, which need much more number of elements to get the same accurate solution as the multiblock structured hexahedral grids. Please see this very carefully:
http://www.advanceddo.com/mesh_generation.html |
|
November 25, 2013, 01:31 |
|
#6 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
Gambit can hexa structured (map), hexa unstructured (pave), tetra (tgrid), tetra (hexcore), etc...
https://www.sharcnet.ca/Software/Gam...mesh_volm_mesh
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is OpenFOAM right software for whrilpool simulation | dcarden | OpenFOAM | 8 | December 10, 2012 13:55 |
Need advice on software choice | bramdiff | Main CFD Forum | 4 | August 30, 2010 20:28 |
CAD integrated CFD Software | kostikr | Main CFD Forum | 3 | February 4, 2010 14:38 |
[FloWorks] Request advice for an airfoil calculation problem | Bogey Jammer | Main CFD Forum | 0 | September 29, 2009 17:06 |
Need help in proper CFD software | AMusteykis | Main CFD Forum | 0 | September 6, 2009 08:28 |