|
[Sponsors] |
How Other Conditions Impact Mass Flow Rate Outlet |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 7, 2007, 22:59 |
How Other Conditions Impact Mass Flow Rate Outlet
|
#1 |
Guest
Posts: n/a
|
Hi all,i have modeled a Rectangular parallelepiped with two mass flow inlets at each end face ,a pressure outlet at other only face.k-e viscosity model. split outlet into to two equal half . while continue equition has converged and total mass flow rate of outlet is steady,but the mass flow rate at each half keep fluctuating. how it can be? how can i accelerate it to steady thanks in advance andy P.
|
|
February 8, 2007, 10:13 |
Re: How Other Conditions Impact Mass Flow Rate Out
|
#2 |
Guest
Posts: n/a
|
What kind of numerical discretization do you use for the problem.?
|
|
February 9, 2007, 10:41 |
Re: How Other Conditions Impact Mass Flow Rate Out
|
#3 |
Guest
Posts: n/a
|
i pick the segregate solver SIMPLE pressure-velocity coupling discretization.it deals with a ordinary steady problem.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
UDF to measure Mass Flow Rate | a.lynchy | Fluent UDF and Scheme Programming | 31 | October 4, 2018 14:10 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Mass flow rate through each cell | Babakjingo | Main CFD Forum | 0 | August 21, 2011 03:18 |
How to change from mass flow to volume flow rate | stanley | FLUENT | 1 | February 2, 2007 06:44 |
Constant mass flow rate / choking outlet bounardy condition | Min Zhu | Main CFD Forum | 1 | September 29, 1998 15:33 |