CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

How to smooth hexa mesh externally in ICEM?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 16, 2007, 04:44
Default How to smooth hexa mesh externally in ICEM?
  #1
BONOHUGO
Guest
 
Posts: n/a
Hi, there! I created a hexa mesh which is very large of the order of millions, when I smoothed it in the mesh editor, the editor quickly jumped out and hung, but the mesh was nothing changed! I am using ICEM CFD 10.0. Is there anyone who can tell me how to go through the procedures? Many thanks in advance!

Bonohugo
  Reply With Quote

Old   July 16, 2007, 10:09
Default Re: How to smooth hexa mesh externally in ICEM?
  #2
myron
Guest
 
Posts: n/a
Personally I would use the blocking procedure and the 'check' features within the blocking process to get the mesh to be a good enough quality. The hexa mesh smoothing in ICEM is really too complex to be of any real use.
  Reply With Quote

Old   July 16, 2007, 16:59
Default Re: How to smooth hexa mesh externally in ICEM?
  #3
Anantha
Guest
 
Posts: n/a
Hello,

Yes, even I would prefer checking the quality inside the blocking option. There, it's more convenient to understand and correct the errors. In mesh editor, the smoothing option is auto and thus we don't have much control over it. It is useful only when we generate tetra mesh.

Regards Anantha
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 03:52
inflation layers for hexa mesh using icem cfd Apple CFX 4 January 6, 2012 00:12
problem when converting mesh (made by ICEM) using fluentMeshToFoam Forrest_Lei OpenFOAM 11 October 16, 2009 06:28
icem hexa mesh beginner icem beginner FLUENT 2 July 9, 2008 07:27
ICEM hexa mesh tutarial 2d car problem cfduser CFX 2 March 9, 2008 09:40


All times are GMT -4. The time now is 00:09.