 |
 |
 |
|
|
|
[Sponsors] | ||||
|
|
October 29, 2007, 07:54
|
pressure boundary condition
|
#1 |
|
Guest
Posts: n/a
|
What would be pressure boundary condition on airfoil surface that oscillates in inviscid and viscous fluid flow? please send me a paper regarding this subject.
|
|
|
||
|
October 29, 2007, 10:42
|
Re: pressure boundary condition
|
#2 |
|
Guest
Posts: n/a
|
That would depend on what kind of solver you are using and what velocity components that you use.A neumann boundary condition of dp/dn=0 or extrapolation seems to work.But it again depends on the details of your solver.
|
|
|
|
||
|
October 29, 2007, 18:53
|
Re: pressure boundary condition
|
#3 |
|
Guest
Posts: n/a
|
Hi, I've been using dp/dn=0 in oscillating airfoil. However, some other ppl had used dp/dn=-(Du/Dt).n, where Du/dt is the material derivative and n is the normal. Is this a more accurate BC?
Thanks |
|
|
|
||
|
October 29, 2007, 18:59
|
Re: pressure boundary condition
|
#4 |
|
Guest
Posts: n/a
|
Yes, the pressure gradient should be balanced by the normal acceleration. That's what the normal momentum equation can be approximated by at the boundary.
|
|
|
|
||
|
November 3, 2007, 09:42
|
Re: pressure boundary condition
|
#5 |
|
Guest
Posts: n/a
|
How can we calculate Du/Dt on an oscillating airfoil surface?
|
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wind turbine simulation | Saturn | CFX | 58 | July 3, 2020 01:13 |
| mixed inflow/outflow downstream boundary condition question | peob | OpenFOAM Running, Solving & CFD | 3 | February 3, 2017 10:54 |
| Pressure boundary condition | C-H Kuo | Main CFD Forum | 18 | September 16, 2016 03:19 |
| Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
| Pressure Boundary condition | abishek | FLUENT | 1 | July 28, 2008 08:14 |
Hybrid Mode
