|
[Sponsors] |
October 22, 1999, 14:00 |
Grid for Fluent v.4 using Gambit?
|
#1 |
Guest
Posts: n/a
|
Hi! There,
Could anyone tell us how to generate grid for Fluent V.4 by using Gambit? We can generate grid using Gambit. The grid can be read by Fluent V.5, but not V. 4 We can generate grid for Fluent V.4 by using Prebfc (or Geomesh). Unfortunately, we are unfamiliar with Prebfc. Thank you very much. Ray |
|
October 22, 1999, 14:29 |
Re: Grid for Fluent v.4 using Gambit?
|
#2 |
Guest
Posts: n/a
|
There should be option under Solver that allow you to choose Fluent 4.0. I would hope that this would work.
Demselles Hollowajiwoak |
|
October 22, 1999, 15:56 |
Re: Grid for Fluent v.4 using Gambit?
|
#3 |
Guest
Posts: n/a
|
As Demselles said, choose the Fluent 4 option under Gambit, AND make sure you have a structured grid.
|
|
October 27, 1999, 12:35 |
Re: Grid for Fluent v.4 using Gambit?
|
#4 |
Guest
Posts: n/a
|
Hello
If you would like to continue using Geomesh, please visit our webpage www.icemcfd.com and check for special offer for geomesh customer. ICEM CFD has several meshing tools that can do the job. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
O-type grid GAMBIT | ff | FLUENT | 2 | September 2, 2012 09:08 |
2-D grid around airfoil in Gambit | helter-skelter | ANSYS Meshing & Geometry | 3 | November 5, 2009 17:02 |
export gambit grid to tecplot | ztdep | FLUENT | 1 | September 17, 2008 19:01 |
Different grid spacing in Gambit - Fluent | Vasilis X | FLUENT | 1 | November 8, 2005 04:22 |
Dead cells created on edges when a grid file is generated in GAMBIT and imported into FLUENT4 | Isaac Manohar Ch. | FLUENT | 1 | June 2, 2000 04:58 |