|
[Sponsors] |
November 26, 2018, 07:08 |
Flow Separation Case
|
#1 |
New Member
Amit Joshi
Join Date: Aug 2018
Posts: 6
Rep Power: 8 |
Can anyone suggest me a simple case to verify flow separation? I have implemented a wall function and want to verify the same for the regions of the adverse pressure gradient.
I have tried NACA 4412 aerofoil case by NASA but the results are bit different. Maybe because of the mesh I used for higher Y+ values was not that refined as NASA. I want to try some other case. |
|
December 1, 2018, 01:27 |
|
#2 |
Senior Member
Hamid Zoka
Join Date: Nov 2009
Posts: 293
Rep Power: 19 |
Hi;
Step flow or flow past a cylinder can be simple examples of separation. |
|
Tags |
boundary layer, cfd, separation, wall function |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issues on the simulation of high-speed compressible flow within turbomachinery | dowlee | OpenFOAM Running, Solving & CFD | 11 | August 6, 2021 07:40 |
'2-phase' gas-liquid flow validation on this case. | Ash Kot | FLUENT | 0 | June 1, 2017 19:25 |
Setting up a case for a plane plate in a longitudinal flow | Chronique | OpenFOAM Running, Solving & CFD | 0 | October 9, 2014 15:17 |
[CFX] Simulation of Flow Separation in a rectangular diffuser - Convergence Problem | anon_b | CFX | 11 | May 6, 2012 21:16 |
Different flow patterns in CFX and Fluent | avi@lpsc | FLUENT | 4 | April 8, 2012 07:12 |