[pranay10]

Hello Experts,

I am trying to simulate a case where we are supposed to simulate a hypersonic air flow over a spiked blunt body with an aerospike and an aerodisk attached to the spike's mouth. We are using Ansys Fluent 2022 R2 Student version for the simulation.

I have attached the image of our mesh. The solver conditions are as follows -
Free Stream Conditions - Temperature = 247K, Pressure - 21.96 Pa, Ma = 6,
Wall Temperature = 300K. We have used the pressure far field condition. Our task is to estimate the Coefficient of Drag.


The issue that we are facing here is -
1. While, mapping the Cd, the solver calculates the value of Cd to be around 0.3 (Ideal Cd for this case should be nearly 0.6)
OR
The simulation blows up after reaching incessantly high values for Cd (i.e. 150000).

Kindly suggest what changes I have to make in order to obtain an accurate value for the Cd.

I understand that sharing external links is not preferred. However, due to limits in file size please accept the drive link shared.

https://drive.google.com/file/d/1cTV...bR3mYg-ZE/view