CFD Online Logo CFD Online URL
Home > Forums > General Forums > Main CFD Forum

Wrong Temperatur Multiflow

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   August 17, 2022, 06:02
Default Wrong Temperatur Multiflow
New Member
Join Date: Jul 2019
Posts: 23
Rep Power: 6
ehecboy is on a distinguished road
I noticed something very strange.

In fluent I have a solid and fluid domain. On the outer wall, I specify a heat flux. The fluid is defined as air. The temperature curve of the wall corresponds to that of the measurement.

If I now use the Eulerian model (air & steam) with the default settings, the increase in wall temperature is underestimated by 50 %, even though the fluid domain is initialised to 100 % with air and there is only one outlet (no inlet) without any backflow. Hence over the whole calculation time is no steam present.

I tried it laminar as well turbulent. Always same outcome

Does anyone have any ideas? I am using the 2020R2 version.

Update: I does work with the VOF model
ehecboy is offline   Reply With Quote


fluent 2020 r2, multiflow

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
What's wrong with COMSOL? andy.sun.wei COMSOL 9 March 23, 2022 12:30
udf error srihari FLUENT 1 October 31, 2016 14:18
Wrong wall distance with cyclic boundaries sebastian OpenFOAM Bugs 4 October 31, 2012 10:24
Wrong oriented faces due to opposite face bends? Arnoldinho OpenFOAM 5 August 16, 2012 05:00
CFX problems with supersonic inlet condition - Inlet values in CFX-Post are wrong jannnesss CFX 5 February 25, 2011 16:24

All times are GMT -4. The time now is 01:29.