Error in ANSYS Fluent simulation

JannisSif · March 6, 2023, 03:03

Hi all,

I am running a simulation in Ansys Fluent (2022 R2), and at some point, it raises the following error:

Unexpected error in GuiOperationMetaData callback for Claim. The operation will be disabled for the remainder of this session: Destination array is not long enough to copy all the items in the collection. Check array index and length.

The simulation continues normally, but in the end, no results are saved. Has anybody ever experienced that?

Thanks!
Best regards,
Jannis

Jonasbsh · February 24, 2024, 08:07

Hey Jannis,

I got the same Problem and wanted to ask if you found a solution?

Jonas

JannisSif · February 25, 2024, 14:47

Hi Jonas,

What worked for me was to move the file that I ran on the Desktop (so the path was very short). Hope it works for you too. Good luck!

March 6, 2023, 03:03	Error in ANSYS Fluent simulation	#1
JannisSif New Member Jannis Join Date: Aug 2018 Posts: 12 Rep Power: 7	Hi all, I am running a simulation in Ansys Fluent (2022 R2), and at some point, it raises the following error: Unexpected error in GuiOperationMetaData callback for Claim. The operation will be disabled for the remainder of this session: Destination array is not long enough to copy all the items in the collection. Check array index and length. The simulation continues normally, but in the end, no results are saved. Has anybody ever experienced that? Thanks! Best regards, Jannis

February 24, 2024, 08:07	Found a solution?	#2
Jonasbsh New Member jonas Join Date: Feb 2024 Posts: 2 Rep Power: 0	Hey Jannis, I got the same Problem and wanted to ask if you found a solution? Jonas

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ansys Fluent crashing when starting simulation	marccfd25	FLUENT	3	July 27, 2022 09:02
Moving Shock tube simulation in Ansys fluent	Patelp1996	FLUENT	1	September 11, 2020 04:16
Gravel bedform simulation by Ansys Fluent	sajacivil	FLUENT	5	April 11, 2020 12:02
1way FSI simulation using ansys structural and Fluent	mmkkeshavarzi	FLUENT	0	August 5, 2015 10:49
Comparison between Solidworks Flow Simulation and Ansys Fluent	Bruce828	Main CFD Forum	5	February 23, 2013 10:13

February 25, 2024, 14:47		#3
JannisSif New Member Jannis Join Date: Aug 2018 Posts: 12 Rep Power: 7	Hi Jonas, What worked for me was to move the file that I ran on the Desktop (so the path was very short). Hope it works for you too. Good luck!