CFD Online Logo CFD Online URL
Home > Forums > General Forums > Main CFD Forum

boundary conditions for axisymmetric problem

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   June 19, 2009, 15:52
Default boundary conditions for axisymmetric problem
New Member
Join Date: Jun 2009
Posts: 27
Rep Power: 16
eers is on a distinguished road
Hi all

I have doubt regarding boundary conditions for axisymmetric problem. It's a 3D fuel slinger and i modelled it as 2D but i m not able to give axis BC as i havn't mentioned axis in my problem. But the geometry made by assuming x-axis as it's axis...the problem geoemetry is attached below..thanks in advance!!!


Last edited by eers; July 8, 2009 at 15:23.
eers is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent accuracy and boundary conditions Paolo Lampitella FLUENT 0 June 12, 2008 07:25
boundary conditions problem Gui CFX 3 August 18, 2007 08:33
Water vapour condensation in CFX-5.7.1 hdj CFX 1 November 27, 2005 08:15
New topic on same subject - Flow around race car Tudor Miron CFX 15 April 2, 2004 07:18
Problem with Boundary conditions Mahiboobswamulu Main CFD Forum 10 August 26, 2003 14:24

All times are GMT -4. The time now is 14:23.