|
[Sponsors] |
Mathematical analysis of the cyclic stresses in the Wind Turine Blade Root |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 26, 2010, 11:33 |
Mathematical analysis of the cyclic stresses in the Wind Turine Blade Root
|
#1 |
New Member
Milind Shende
Join Date: May 2010
Posts: 2
Rep Power: 0 |
Dear All,
When wind turbine rotor rotates it's blades especially blade roots undergo cyclic stresses. These stresses are due to gravitation forces and inertial forces. Could any body of you explain me how these cyclic forces vary? I am interested to know the basic mechanics of these forces for example what would be the stress level in a blade root when the blade is perpendicular to group (pointing towards ground or sky), or the stress level when a blade is horizontal etc....(I am not much interested in Aerodynamics forces, since for steady mean wind flow they are constant) Apart from basic mechanics of these stresses I would also like to go in the details of mathematical analysis of this phenomenon. So could you please suggest me some good reference book, lecture notes or any other written material. thanks a lot in advance, regards, Milind. |
|
May 26, 2010, 11:36 |
|
#2 |
New Member
Milind Shende
Join Date: May 2010
Posts: 2
Rep Power: 0 |
???
thanks and regards, #Milind Shende# |
|
Tags |
basic mechanics, blade root, cyclic stresses, mathematical analysis, wind turbine blade |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
please help in simulating a wind turbine blade in 6 DOF ????.... | usman naseer | Main CFD Forum | 2 | March 10, 2016 03:53 |
[Other] ANSYS CFX-Meshing problem of a wind turbine blade | Zoe | ANSYS Meshing & Geometry | 1 | July 14, 2010 03:02 |
Wind Turbine Blade Geometry | SeanieB | Main CFD Forum | 0 | November 27, 2009 11:18 |
stress analysis of a rotating beam(wind blade) | Cheyannne | ANSYS | 0 | October 19, 2009 18:06 |
Reg - Vertical Axis wind mill analysis | ADAIKALARAJA | Siemens | 4 | June 3, 2009 03:23 |