# Modelling sound propagation through layered porous media

 Register Blogs Members List Search Today's Posts Mark Forums Read

 July 4, 2010, 14:45 Modelling sound propagation through layered porous media #1 New Member   Nicholas Kinar Join Date: Jul 2010 Posts: 1 Rep Power: 0 Sponsored Links Hello--- I would like to set up a CFD problem that models the propagation of an acoustic pulse through a layered porous (Biot-type) medium. Here is the physical setup of the system that I would like to model. An acoustic source is situated in the air above the surface of the layered porous medium. The pore space of each layer in the medium contains an unsaturated mixture of air and water and each layer has different physical properties. The source radiates an arbitrary sound pulse toward the layered porous medium. This implies that the source function is not analytic, and can be updated at every time step. The sound wave incident at the air-medium interface couples into the porous medium. Reflections occur at the air-medium interface and at each of the interfaces in the porous medium. The porous medium (fluid and frame) should have a temperature and thermal properties. At this time, I would like to model the effects of temperature on the sound wave, and not the transport of heat and energy. The boundary conditions should approximate free-field conditions. I believe that this would entail using some form of Perfectly Matched Layer (PML) to attenuate reflections. I would like to determine the RMS pressure of reflections from the layered porous medium at arbitrary points in the air above the surface of the porous medium. How should I begin? I suspect that I should do one of the following: (1) model the porous medium using FEM; or (2) use Green's function solutions to generate a synthetic seismogram (but can this be done for an arbitrary source function?) Essentially what I am looking for is: (1) A good reference on the equations used to set up this model, showing how to couple the unsaturated porous medium with the thermal conditions. (2) If available, a code or solver which may help with the setup and modeling of this physical system. Could this model be set up using COMSOL or OpenFOAM?

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post legendyxg FLUENT 9 April 21, 2009 22:24 matt FLUENT 0 February 19, 2008 09:29 Igor Main CFD Forum 0 December 5, 2002 16:16 Rina Main CFD Forum 0 April 10, 2002 10:01 Rina Lum Main CFD Forum 1 March 25, 2002 17:55