|
[Sponsors] |
November 21, 2004, 18:49 |
shock tube validation
|
#1 |
Guest
Posts: n/a
|
Hello,
I have done a shock tube analysis in Star-CD and I need to validate it. Can some one tell me how to validate my results with analytical results or from the shock tables. What all variables do I need to check for validation and what pressures should I look for. I have some idea and I need some other tips from u to extend it. Regarding validating shock tube, I would just go to the normal shock tables in which property ratios are tabulated as a function of Mach number. Find total pressure ratio on the table and see what M1, M2, T2/T1, etc. that corresponds to. For example, for Pt2/Pt1=0.4990, M1=2.50, M2=0.5130, T2/T1=2.137, Ps2/Ps1=7.125, and D2/D1=V1/V2=3.333 (D=density). V1 = M1*sqrt(gam*Rgas*T1) V2 = V1 / (V1/V2) shock speed = V1 - V2 But I have given a pressure and temp to one side of a tube and different pressure and temp to other side . what scalar data should I look for in my results ?? Can someone help me!!! Thanks, AB |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HLL Riemann Shock Tube Matlab Problem | Luke F | Main CFD Forum | 2 | May 20, 2016 02:10 |
Shock tube simulation | harish | FLUENT | 5 | January 25, 2014 02:20 |
ghost fluid method (shock tube problem) | Amir | Main CFD Forum | 0 | March 1, 2009 06:16 |
shock tube validation | AB | Siemens | 0 | November 21, 2004 18:43 |
Shock tube problem | AB | Siemens | 1 | November 9, 2004 00:25 |