Cubit going open source?

phsieh2005 · October 25, 2012, 19:55

Hi,

I saw somewhere that cubit is going to release as open source soon. I am wondering if anyone can confirm this and post more details.

Pei-Ying

cnsidero · October 26, 2012, 22:01

Quote:

Originally Posted by phsieh2005

Hi,

I saw somewhere that cubit is going to release as open source soon. I am wondering if anyone can confirm this and post more details.

Pei-Ying

Yes, it was announced at the International Meshing Roundtable (IMR) conference in San Jose the week before last. An exact date wasn't given but on the order of a couple of months.

tang76 · October 28, 2012, 04:37

Oh, that's really very exciting news!

Thanks

phsieh2005 · October 29, 2012, 13:54

Quote:

Originally Posted by cnsidero

Yes, it was announced at the International Meshing Roundtable (IMR) conference in San Jose the week before last. An exact date wasn't given but on the order of a couple of months.

Thanks! If released by Dec. 25, it will be a nice Christmas gift!

Pei-ying

tang76 · January 16, 2013, 01:44

Quote:

Originally Posted by cnsidero

Yes, it was announced at the International Meshing Roundtable (IMR) conference in San Jose the week before last. An exact date wasn't given but on the order of a couple of months.

any good news?

Thanks

tang76 · November 14, 2013, 01:28

Quote:

Originally Posted by cnsidero

Yes, it was announced at the International Meshing Roundtable (IMR) conference in San Jose the week before last. An exact date wasn't given but on the order of a couple of months.

Is there any good news? It has passed for more than a year

Thanks

jchawner · December 1, 2013, 17:54

The open sourcing of CUBIT was announced at the 21st IMR but at this year's 22nd IMR I heard that things did not go as per the initial plan. I'm supposed to talk to someone later this month with direct knowledge of the matter and I'll try to share what I learn.

francois · June 14, 2014, 05:25

Any good news ?
Is Cubit going to be released as open source ?

Thanks

francois · June 20, 2014, 10:26

Anyone ?

tang76 · June 20, 2014, 10:37

Quote:

Originally Posted by francois

Anyone ?

I am also waiting for good news

jchawner · June 25, 2014, 09:22

I am seeking an authoritative answer and will post it here if/when I get one.

francois · June 25, 2014, 09:54

Great, thanks !

francois · July 6, 2014, 15:11

John, did you manage to have an answer and if so are you authorized to post it here ?

Thanks again for your kind help.

Best regards,
François

jchawner · July 6, 2014, 18:20

Dudes, I realize I was the one who started this tale based on statements by someone from Sandia at the Int'l Meshing Roundtable 2 years ago, but gimme time. As soon as I hear something factual from someone knowledgeable I will share the info.

francois · October 21, 2014, 06:47

Any news on the subject ?
Thanks

jchawner · October 22, 2014, 09:04

No, I have no news to report on this topic.

(I would've replied simply "No" but apparently the forum software doesn't like messages shorter than 10 characters.)

Dijkstra · March 30, 2017, 06:40

Should we lose hope?

jchawner · March 30, 2017, 08:01

Yes.......

October 25, 2012, 19:55	Cubit going open source?	#1
phsieh2005 Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 334 Rep Power: 19	Hi, I saw somewhere that cubit is going to release as open source soon. I am wondering if anyone can confirm this and post more details. Pei-Ying

December 1, 2013, 17:54		#7
jchawner Senior Member John Chawner Join Date: Mar 2009 Location: Fort Worth, Texas, USA Posts: 275 Rep Power: 19	The open sourcing of CUBIT was announced at the 21st IMR but at this year's 22nd IMR I heard that things did not go as per the initial plan. I'm supposed to talk to someone later this month with direct knowledge of the matter and I'll try to share what I learn. chegdan, wyldckat, phsieh2005 and 3 others like this. __________________ John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner

June 25, 2014, 09:22		#11
jchawner Senior Member John Chawner Join Date: Mar 2009 Location: Fort Worth, Texas, USA Posts: 275 Rep Power: 19	I am seeking an authoritative answer and will post it here if/when I get one. __________________ John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner

July 6, 2014, 18:20		#14
jchawner Senior Member John Chawner Join Date: Mar 2009 Location: Fort Worth, Texas, USA Posts: 275 Rep Power: 19	Dudes, I realize I was the one who started this tale based on statements by someone from Sandia at the Int'l Meshing Roundtable 2 years ago, but gimme time. As soon as I hear something factual from someone knowledgeable I will share the info. __________________ John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner

October 22, 2014, 09:04		#16
jchawner Senior Member John Chawner Join Date: Mar 2009 Location: Fort Worth, Texas, USA Posts: 275 Rep Power: 19	No, I have no news to report on this topic. (I would've replied simply "No" but apparently the forum software doesn't like messages shorter than 10 characters.) elvis likes this. __________________ John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner

October 28, 2012, 04:37		#3
tang76 New Member tang Join Date: Oct 2012 Posts: 5 Rep Power: 14	Oh, that's really very exciting news! Thanks

June 14, 2014, 05:25		#8
francois Senior Member Francois Beaubert Join Date: Mar 2009 Location: Lille, France Posts: 147 Rep Power: 18	Any good news ? Is Cubit going to be released as open source ? Thanks

June 20, 2014, 10:26		#9
francois Senior Member Francois Beaubert Join Date: Mar 2009 Location: Lille, France Posts: 147 Rep Power: 18	Anyone ?

June 25, 2014, 09:54		#12
francois Senior Member Francois Beaubert Join Date: Mar 2009 Location: Lille, France Posts: 147 Rep Power: 18	Great, thanks !

July 6, 2014, 15:11		#13
francois Senior Member Francois Beaubert Join Date: Mar 2009 Location: Lille, France Posts: 147 Rep Power: 18	John, did you manage to have an answer and if so are you authorized to post it here ? Thanks again for your kind help. Best regards, François

October 21, 2014, 06:47		#15
francois Senior Member Francois Beaubert Join Date: Mar 2009 Location: Lille, France Posts: 147 Rep Power: 18	Any news on the subject ? Thanks

March 30, 2017, 06:40		#17
Dijkstra New Member Join Date: Mar 2017 Posts: 1 Rep Power: 0	Should we lose hope?

March 30, 2017, 08:01		#18
jchawner Senior Member John Chawner Join Date: Mar 2009 Location: Fort Worth, Texas, USA Posts: 275 Rep Power: 19	Yes....... __________________ John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tecio compilation errors in latest 1.6.x	rsamuel	OpenFOAM Bugs	2	June 25, 2021 08:10
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh	gschaider	OpenFOAM Community Contributions	300	October 29, 2014 18:00
friction forces icoFoam	ofslcm	OpenFOAM	3	April 7, 2012 10:57
OF 1.6 \| Ubuntu 9.10 (64bit) \| GLIBCXX_3.4.11 not found	piprus	OpenFOAM Installation	22	February 25, 2010 13:43
UDF Scalar Code: HT 1	Greg Perkins	FLUENT	8	October 20, 2000 12:40