Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Premesh CAD quality

Updated Threads

Search this Thread

Prev

Previous Post

Next Post

Next

January 10, 2018, 06:52	Premesh CAD quality	#1
Fridrik Member Fridrik Magnusson Join Date: Aug 2017 Location: Denmark Posts: 34 Rep Power: 8	I have made a mesh of a very complex structure, and by using snappyHexMesh. In the process there was a lot of failed meshes, and wondered if anybody has some kind of measure of the premesh quality of a CAD file? I have an idea to a way of quantify this: This is the length of the smallest line divided by the length of the average line $\bar{S}=\frac{min(l_i)}{\frac{1}{n}\sum^n_{i=1}(l_i)}$

Tags

premesh, snappyhexmesh

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Unexplained changes of mesh quality and blocking approach	salumi	ANSYS Meshing & Geometry	9	November 23, 2016 04:14
[ICEM] How to improve bad quality elements that are obtained after creating prism layers?	Rohith Giridhar	ANSYS Meshing & Geometry	2	July 11, 2015 18:04
[ICEM] Premesh quality criterion: "Angle" and "Min Angle"	saisanthoshm88	ANSYS Meshing & Geometry	3	February 26, 2014 10:23
[ICEM] Hex refinement negative quality afterwards	Anorky	ANSYS Meshing & Geometry	8	March 22, 2010 03:25
STAR-Works : Mainstream CAD with CFD	CD adapco Group Marketing	Siemens	0	February 13, 2002 12:23

All times are GMT -4. The time now is 08:06.