|
[Sponsors] |
January 26, 2015, 02:42 |
minimizing the error in 2d mesh (HYPERMESH)
|
#1 |
New Member
sagar chopra
Join Date: Jun 2014
Posts: 6
Rep Power: 12 |
i have tried to surface mesh the turbine using surface deviation option but the values of cell squish and equia skew i am getting are very high. what measures should i take to reduce those values to around 0.3 to 0.4.
the link of the model is https://www.dropbox.com/s/owgwxc6vlm...urbine.hm?dl=0 |
|
Tags |
2d mesh, 2d mesh into 3d, hypermesh |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Add Mesh Layers doesnt work on the whole surface | Kryo | OpenFOAM Meshing & Mesh Conversion | 13 | February 17, 2022 07:34 |
[snappyHexMesh] problems generating clean mesh | Christian_tt | OpenFOAM Meshing & Mesh Conversion | 2 | June 20, 2019 05:39 |
How to import mesh file in OpenFOAM,created in Hypermesh | devesh.baghel | OpenFOAM | 17 | June 8, 2016 07:40 |
[snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 09:03 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |