Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Wind Turbine blade meshing in ICEM CFD

Updated Threads

Reply

Search this Thread

September 1, 2018, 09:41	Wind Turbine blade meshing in ICEM CFD	#1
San198 New Member Join Date: Jan 2018 Posts: 1 Rep Power: 0	HI, I am meshing a wind turbine blade in ICEM CFD. I started with a structured mesh and there has been some problem in the surface mesh. The mesh near the trailing edge of the blade is getting merged(as in the images attached). I think it is an association problem but I'm having a hard time figuring out the exact problem. Please help me out with this. Thank you in advance https://drive.google.com/open?id=16V...KaI2ZHltY-xiMn https://drive.google.com/open?id=13C...M7fCm1iVnKiAke Last edited by San198; September 1, 2018 at 09:45. Reason: Image not visible in the post

Reply

Tags

icem cfd 15.0, meshing 3d, wind turbine blade

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Meshing a wind turbine blade	mrswordf1sh	FLUENT	4	February 9, 2016 18:55
Does anyone have 3D blade profile of wind turbine?	kenya0514	Main CFD Forum	5	March 9, 2015 14:06
State of the Art in CFD for wind turbine modeling	SET_WIND	Main CFD Forum	0	October 9, 2012 06:01
ICEM CFD creating the grid of a Wind Turbine blade	Dan	CFX	11	June 1, 2012 14:11
[ICEM] Meshing a 2D Goldman Annular Turbine Blade in ICEM	ergometer	ANSYS Meshing & Geometry	4	March 30, 2012 22:34

All times are GMT -4. The time now is 01:33.