CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Ennova-CFD, the better CFD meshing solution

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 8, 2023, 09:12
Default Ennova-CFD, the better CFD meshing solution
  #1
Senior Member
 
joegi
Join Date: Nov 2009
Location: genoa
Posts: 104
Rep Power: 16
joegi.geo is on a distinguished road
Ennova-CFD is a general-purpose automatic meshing tool and easy-to-use OpenFOAM GUI. The CAD and meshing kernels run using Ennova meshing software (https://ennova-cfd.com/), and the GUI seamlessly integrates with OpenFOAM under Windows (using WSL) or Linux.

EnnovaCFD uses surface-to-volume (topology mesh-based) and volume-to-surface (surface wrapper) meshing approaches.

The octree-based surface wrapper can deal with dirty geometries. The surfaces generated by the wrapper can be used to create volume meshes (tetrahedral or polyhedral meshes).

The Tetra-Polyhedral meshing tool is based on the Delaunay method. It can generate wall-resolving prismatic layers even in the most complicated geometries. The polyhedral meshes can reduce the cell count by as much as six times while conserving the geometrical features and maintaining high-quality meshes.

For more information visit our website www.wolfdynamics.com.

EnnovaCFD leatlet
https://www.dropbox.com/scl/fi/buuuo...bxs9w73xr&dl=0


Ennova-CFD, the better CFD meshing solution
joegi.geo is offline   Reply With Quote

Reply

Tags
cfd, ennova, meshing, openfoam


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Importing CFD solution data in CFD POST Aveek Pal ANSYS 2 February 24, 2020 04:04
[Other] ANSYS Meshing vs ICEM CFD jayyeahhkay ANSYS Meshing & Geometry 6 December 14, 2014 01:43
Using ICEM CFD to repair/edit ANSYS Meshing Kaaji1359 ANSYS 2 July 30, 2013 11:28
[ICEM] problem with meshing in icem cfd saurabhjoshi2011 ANSYS Meshing & Geometry 13 March 12, 2013 12:27
[ANSYS Meshing] Issues in exporting mesh from Meshing to ICEM CFD sihaqqi ANSYS Meshing & Geometry 5 March 5, 2013 03:40


All times are GMT -4. The time now is 19:31.