How to create 2D meshes for CFD analysis (1 Element across thickness)

hr_nt · November 15, 2022, 22:24

Greetings to all !
I wish to recreate the results from the 2D zero pressure gradient flat plate case described here. I am using OpenFOAM as my solver and thus I have to create a mesh that has 1 cell across the thickness in order to simulate a 2D case. However I am not able to do this in salome. I have tried automatic hypothesis for tetrahedrals and hexahedrals and in both I end up with multiple cells across the thickness. I am really stuck on how to apply one cell restriction across the thickness of the domain. I would really like to get some clarity/tips on this.

Brandon16 · November 17, 2022, 01:47

Hello,

I would also be interested in this information. Thank you in advance to all those who will respond. It will help me a lot.

hr_nt · November 17, 2022, 01:51

I found some videos on this topic

https://www.youtube.com/watch?v=OYkCzormEvw

and

https://www.youtube.com/watch?v=7l3ea7nwSrc&t=83s

November 15, 2022, 22:24	How to create 2D meshes for CFD analysis (1 Element across thickness)	#1
hr_nt New Member HR Join Date: Nov 2022 Posts: 17 Rep Power: 3	Greetings to all ! I wish to recreate the results from the 2D zero pressure gradient flat plate case described here. I am using OpenFOAM as my solver and thus I have to create a mesh that has 1 cell across the thickness in order to simulate a 2D case. However I am not able to do this in salome. I have tried automatic hypothesis for tetrahedrals and hexahedrals and in both I end up with multiple cells across the thickness. I am really stuck on how to apply one cell restriction across the thickness of the domain. I would really like to get some clarity/tips on this.

November 17, 2022, 01:47		#2
Brandon16 New Member Brandon Join Date: Nov 2022 Posts: 1 Rep Power: 0	Hello, I would also be interested in this information. Thank you in advance to all those who will respond. It will help me a lot. __________________ My website here Last edited by Brandon16; November 21, 2022 at 07:34.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Gmsh] 3D Mesh conversion from gmsh-2.5.0 to OpenFOAM	Ancioi	OpenFOAM Meshing & Mesh Conversion	17	January 8, 2019 23:50
Changing the element type for analysis	ayush02mishra	Structural Mechanics	0	March 19, 2016 21:44
Shell element in squeeze film analysis of MEMS?	iskandar	ANSYS	0	January 6, 2012 04:35
Where's the singularity/mesh flaw?	audrich	FLUENT	3	August 4, 2009 01:07
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

November 17, 2022, 01:51		#3
hr_nt New Member HR Join Date: Nov 2022 Posts: 17 Rep Power: 3	I found some videos on this topic https://www.youtube.com/watch?v=OYkCzormEvw and https://www.youtube.com/watch?v=7l3ea7nwSrc&t=83s