|
[Sponsors] |
Mesh of a cylinder with different top/bottom faces |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 9, 2023, 18:33 |
Mesh of a cylinder with different top/bottom faces
|
#1 |
New Member
Pedro Lacerda Montes
Join Date: May 2021
Posts: 1
Rep Power: 0 |
Hi, I'm trying to model the inside of an ionic thrust chamber which consists of a solid cylinder with different bottom and top faces:
- The bottom face has a circle in the middle (mass-flow inlet) (fig 1) - The top face has multiple circles arranged in circular patterns (outlet) (fig 2) My desire is to generate a fully structured mesh, but the best I could do was to generate a hex-core mesh with terrible quality tet-cells at the boundaries. Any ideas on how to tackle this problem? |
|
Tags |
mesh 3d, multizone meshing |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Foam::error::PrintStack | almir | OpenFOAM Running, Solving & CFD | 92 | May 21, 2024 08:56 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 19:57 |
[OpenFOAM.org] OF2.3.1 + OS13.2 - Trying to use the dummy Pstream library | aylalisa | OpenFOAM Installation | 23 | June 15, 2015 15:49 |
snappyhexmesh remove blockmesh geometry | philipp1 | OpenFOAM Running, Solving & CFD | 2 | December 12, 2014 11:58 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 12:55 |