CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Bugs

cyclicGgi + Finite Area Method fails to run in parallel (foam-extend 4.1). Bug?)

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 12, 2018, 09:32
Default cyclicGgi + Finite Area Method fails to run in parallel (foam-extend 4.1). Bug?)
  #1
Senior Member
 
Santiago Lopez Castano
Join Date: Nov 2012
Posts: 354
Rep Power: 15
Santiago is on a distinguished road
Dear all,

So I have implemented a solver that is somewhat similar in structure to interTrackFoam, but for a whole different purpose. Anyway, when running some of my test cases, I stumbled upon some problems trying to run the case where I have a direction of periodicity in parallel. The strange thing is that the case runs quite well in serial, using cyclicGgi, but on the moment I switch to parallel, foam throws an exception from subroutine Foam::treeBoundBox (???). However, I have prepared an example case that reproduces exactly the same error, using interTrackFoam. Note that the code runs quite well in serial.

Finally, I'd like to say that I have some experience programming in the upper abstractions of foam-extend, so it will be very valuable if someone can throw me towards the correct direction in order to deal with this issue if there's any. I apologize in advance if it is just a mistake in the setup.

Many thanks,

S
Attached Files
File Type: zip channel.zip (178.5 KB, 2 views)

Last edited by Santiago; June 12, 2018 at 09:34. Reason: grammar
Santiago is offline   Reply With Quote

Reply

Tags
cyclicggi, finite area method, intertrackfoam


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] mesh airfoil NACA0012 anand_30 OpenFOAM Meshing & Mesh Conversion 13 March 7, 2022 17:22
Finite area method (fac::div) fails in parallel cuba OpenFOAM Running, Solving & CFD 10 November 20, 2012 07:03
[blockMesh] error message with modeling a cube with a hold at the center hsingtzu OpenFOAM Meshing & Mesh Conversion 2 March 14, 2012 09:56
CFX Solver Memory Error mike CFX 1 March 19, 2008 07:22
MPI PROBLEMS gtg627e OpenFOAM Running, Solving & CFD 20 October 5, 2007 04:02


All times are GMT -4. The time now is 10:56.