ParaView display problem

holzmichel · March 10, 2009, 10:06

Hello all,

I installed OF-1.5 and compiled everything.
Here is my prob:

I wanted to try the cavity-test like the manual of OF-1.5.
When paraView has started nothing is shown in the display window still i push my left mouse button. when i press it the figure would displayed for max 1 second. what is the reason? how could i correct it that i see the figure in the display-window all the time?

regards

Michel

mahaputra · March 10, 2009, 15:51

did you check your qt version ? gmp and mpfr ?

prapanj · March 10, 2009, 23:04

Hi Michel, are you using Ubuntu Intrepid? I had the same problem. Set your visual effects to "none" in the appearance preference. It is some graphical display issue.

holzmichel · March 11, 2009, 01:57

Thousend thanks. I set the visual effects to "none" and now it works perfect.

Michel

prapanj · March 11, 2009, 03:20

No problem. And if you ever consider recompiling paraView, make sure you get the older version of Qt( which I was never able to find).

prapanj · March 11, 2009, 03:37

No problem. And if you ever consider recompiling paraView, make sure you get the older version of Qt( which I was never able to find).

holzmichel · March 11, 2009, 04:54

I use qt4.3.4 like in the manual
which one do you use?

tino_boelke · April 27, 2009, 18:42

Hi, im having a problem like holzmichel. After starting paraFoam and clicking the Apply-button, the model doesnt appear (tested this for different tutorials). In the Information-tab is shows that the is imported (for icoFoam/cavity: unstructured grid, 400 cells 882 points). Using foamToVTK works, so i think its a Problem in displaying the Foam files!?
Also turned visual effucts in appearance off.

Im using Ubuntu 9.04, actual OpenFoam-1.5-dev and running ParaView-3.4.0 with Qt-4.3.5. On Ubuntu 8.10 everything worked fine with the same config.

Anyone suggestions?

March 10, 2009, 10:06	Hello all, I installed OF-1	#1
holzmichel New Member michel elsner Join Date: Mar 2009 Location: Germany - Berlin and Leipzig Posts: 26 Rep Power: 16	Hello all, I installed OF-1.5 and compiled everything. Here is my prob: I wanted to try the cavity-test like the manual of OF-1.5. When paraView has started nothing is shown in the display window still i push my left mouse button. when i press it the figure would displayed for max 1 second. what is the reason? how could i correct it that i see the figure in the display-window all the time? regards Michel

March 10, 2009, 15:51	did you check your qt version	#2
mahaputra Member Nugroho Adi Join Date: Mar 2009 Location: norway Posts: 79 Rep Power: 16	did you check your qt version ? gmp and mpfr ?

March 10, 2009, 23:04	Hi Michel, are you using Ubunt	#3
prapanj Senior Member Prapanch Nair Join Date: Mar 2009 Location: Bangalore, India Posts: 105 Rep Power: 16	Hi Michel, are you using Ubuntu Intrepid? I had the same problem. Set your visual effects to "none" in the appearance preference. It is some graphical display issue.

March 11, 2009, 01:57	Thousend thanks. I set the vis	#4
holzmichel New Member michel elsner Join Date: Mar 2009 Location: Germany - Berlin and Leipzig Posts: 26 Rep Power: 16	Thousend thanks. I set the visual effects to "none" and now it works perfect. Michel

March 11, 2009, 03:20	No problem. And if you ever co	#5
prapanj Senior Member Prapanch Nair Join Date: Mar 2009 Location: Bangalore, India Posts: 105 Rep Power: 16	No problem. And if you ever consider recompiling paraView, make sure you get the older version of Qt( which I was never able to find).

March 11, 2009, 03:37	No problem. And if you ever co	#6
prapanj Senior Member Prapanch Nair Join Date: Mar 2009 Location: Bangalore, India Posts: 105 Rep Power: 16	No problem. And if you ever consider recompiling paraView, make sure you get the older version of Qt( which I was never able to find).

March 11, 2009, 04:54	I use qt4.3.4 like in the manu	#7
holzmichel New Member michel elsner Join Date: Mar 2009 Location: Germany - Berlin and Leipzig Posts: 26 Rep Power: 16	I use qt4.3.4 like in the manual which one do you use?

April 27, 2009, 18:42		#8
tino_boelke New Member tino boelke Join Date: Mar 2009 Location: Berlin Posts: 10 Rep Power: 16	Hi, im having a problem like holzmichel. After starting paraFoam and clicking the Apply-button, the model doesnt appear (tested this for different tutorials). In the Information-tab is shows that the is imported (for icoFoam/cavity: unstructured grid, 400 cells 882 points). Using foamToVTK works, so i think its a Problem in displaying the Foam files!? Also turned visual effucts in appearance off. Im using Ubuntu 9.04, actual OpenFoam-1.5-dev and running ParaView-3.4.0 with Qt-4.3.5. On Ubuntu 8.10 everything worked fine with the same config. Anyone suggestions?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem with display	john	FLUENT	8	March 14, 2009 11:40
3D display problem	Victor Cano	FLUENT	1	December 18, 2008 19:35
StarCD display problem	cfddummy	Siemens	3	April 9, 2007 16:59
Problem with Grid display	avinash	FLUENT	2	December 8, 2006 13:49
[OpenFOAM] HI all I cant find display button in paraview when i execute cavity tutorial there is only parameter button in the paraview	chan	ParaView	2	February 13, 2006 07:37