|
[Sponsors] |
[Other] Injection molding solver for OpenFOAM |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 29, 2017, 06:44 |
Injection molding solver for OpenFOAM
|
#1 |
Member
Kristjan
Join Date: Apr 2017
Location: Slovenia
Posts: 36
Rep Power: 9 |
Hello everybody!
I'd like to invite anyone who's interested to try out our solver for injection molding https://github.com/krebeljk/openInjMoldSim. I'd be very grateful for any kind of feedback. We implemented the Tait-equation of state and the Cross-WLF model in compressibleInterFoam from OpenFOAM version 3.0.1 and named it openInjMoldSim. Along the solver there are four cases: a demo case for filling and packing and three tests. The demonstration of filling and packing compares the simulated pressures with experimental values. The cavity is modeled as a 2D case. The experimental pressure evolution from the first measuring position is imposed at one end of the cavity and the other two positions are compared. The validations test
The cases include gnuplot and python scripts to plot the results. |
|
Tags |
injection molding, solver |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Connecting Fluent benefits and Injection Molding Software | Jim87 | FLUENT | 1 | August 6, 2023 16:06 |
fluent divergence for no reason | sufjanst | FLUENT | 2 | March 23, 2016 16:08 |
3d vof | Smaras | FLUENT | 2 | February 19, 2013 06:58 |
Quarter Burner mesh with periosic condition | SamCanuck | FLUENT | 2 | August 31, 2011 11:34 |
why the solver reject it? Anyone with experience? | bearcat | CFX | 6 | April 28, 2008 14:08 |