|
[Sponsors] |
[blastFoam] Issues with delayed simulation start |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 26, 2024, 05:27 |
Issues with delayed simulation start
|
#1 |
New Member
Maxime
Join Date: Feb 2024
Posts: 2
Rep Power: 0 |
Hi everyone,
I'm currently using BlastFoam to solve an explosion problem. To do this, I've carried out analytical calculations of pressure, temperature, velocity and density values at time t in my explosive. I then tried to run my simulation from that point on, modifying the values in the initial files. However, when I compare my simulation starting at time t and my reference simulation, I see a big difference in the pressure profile (see pictures bellow). I think the problem is a bad boundary condition, but I can't work out what it is. I'm also attaching my .zip file for you to look at. Simulation parameter: TNT (radius 0.143m) in 1D (using a double wedge). The JWL parameters were taken from a thesis and verified during a simulation. axisymmetricCharge_double_wedge_JWLC_test_delayed_air.zip Thank you in advance for your help. Delayed.jpg Full.jpg |
|
Tags |
blastfoam, simulation |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Illegal cell label -1, fluent3DMeshToFoam | BenGher | OpenFOAM | 7 | October 10, 2023 00:02 |
mpirun during simulation under Docker (start with ./startOpenFOAM) | spalartallmaras | OpenFOAM Running, Solving & CFD | 1 | November 3, 2021 04:13 |
NREL S809 Aerofoil Simulation - Stall and Drag Issues | mme1998 | CFX | 1 | March 3, 2021 16:24 |
Start the simulation during a valve event | MMatt | CONVERGE | 4 | December 11, 2019 02:12 |
Vented explosion simulation: issues with multi-region meshing and simulation | Dami | OpenFOAM Running, Solving & CFD | 0 | November 13, 2019 08:47 |