|
[Sponsors] |
February 10, 2013, 18:28 |
openfoam 1.6.ext installation
|
#1 |
Member
Arjang Behnoud
Join Date: Oct 2012
Posts: 61
Rep Power: 13 |
hi everyone
i'm installing openfoam-1.6-ext on ubuntu 12.04 LTS, in the compilation step of installation process (i mean the command: cd $WM_PROJECT_DIR ./Allwmake >& log.Allwmake & tail -f log.Allwmake ) terminal shows: In file included from yPlusRAS.C:52:0: /home/amir/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/wallDist.H:66:27: fatal error: cellDistFuncs.H: No such file or directory compilation terminated. make[3]: *** [Make/linux64Gcc46DPOpt/yPlusRAS.o] Error 1 make[3]: Target `/home/amir/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linux64Gcc46DPOpt/yPlusRAS' not remade because of errors. make[2]: *** [yPlusRAS] Error 2 g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3 -DNoRepository -ftemplate-depth-40 -I/home/amir/OpenFOAM/OpenFOAM-1.6-ext/src/transportModels -I/home/amir/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels -I/home/amir/OpenFOAM/OpenFOAM-1.6-ext/src/turbulenceModels/incompressible/RAS/RASModel -I/home/amir/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude -IlnInclude -I. -I/home/amir/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude -I/home/amir/OpenFOAM/OpenFOAM-1.6-ext/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed -Xlinker --no-as-needed Make/linux64Gcc46DPOpt/wallShearStress.o -L/home/amir/OpenFOAM/OpenFOAM-1.6-ext/lib/linux64Gcc46DPOpt \ -lincompressibleRASModels -lincompressibleTransportModels -lfiniteVolume -lOpenFOAM -liberty -ldl -lm -o /home/amir/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linux64Gcc46DPOpt/wallShearStress /usr/bin/ld: cannot find -lincompressibleRASModels /usr/bin/ld: cannot find -lincompressibleTransportModels /usr/bin/ld: cannot find -lfiniteVolume collect2: ld returned 1 exit status make[3]: *** [/home/amir/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linux64Gcc46DPOpt/wallShearStress] Error 1 make[2]: *** [wallShearStress] Error 2 make[2]: Target `application' not remade because of errors. make[1]: *** [wall] Error 2 make[1]: Target `application' not remade because of errors. make: *** [postProcessing] Error 2 make: Target `application' not remade because of errors. what should i do to overcome this problem? thanks a lot best wishes arjang |
|
February 12, 2013, 03:50 |
istallation openFoam-1.6-ext problem
|
#2 |
Member
Arjang Behnoud
Join Date: Oct 2012
Posts: 61
Rep Power: 13 |
hi Dear friends
i'm installing openfoam-1.6-ext when i enter command: ./Allwmake >& log.Allwmake & tail -f log.Allwmake (compile openfoam-1.6-ext) compilation process getting start and after some minutes stop and show some fatal errors like: /home/amir/OpenFOAM/OpenFOAM-1.6-ext/src/finiteVolume/lnInclude/wallDist.H:66:27: fatal error: cellDistFuncs.H: No such file or directory compilation terminated. renumberMesh.C:42:21: fatal error: faceSet.H: No such file or directory compilation terminated faceSet.C:33:27: fatal error: topoSetSource.H: No such file or directory compilation terminated. refineWallLayer.C:39:21: fatal error: cellSet.H: No such file or directory compilation terminated. what should i do? please help me thanks a lbest regards arjang |
|
February 12, 2013, 04:54 |
|
#3 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Arjang,
Please do the following steps:
Best regards, Bruno
__________________
|
|
February 12, 2013, 08:14 |
openfoam-1.6.ext installation problem
|
#4 |
Member
Arjang Behnoud
Join Date: Oct 2012
Posts: 61
Rep Power: 13 |
Last edited by AmirBaqa1987; February 12, 2013 at 08:42. |
|
February 12, 2013, 16:41 |
|
#5 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Arjang,
This is a very strange error... I suggest the following commands: Code:
wcleanAll ./Allwmake >& log.Allwmake The second command is the one you've already executed before. By the way, how much RAM and how many cores does your machine have? Best regards, Bruno
__________________
|
|
February 13, 2013, 05:06 |
openfoam-1.6.ext installation problem
|
#6 |
Member
Arjang Behnoud
Join Date: Oct 2012
Posts: 61
Rep Power: 13 |
Hi Dear Bruno
(my machine has quad core(corei7)& 8 gig ram) i did those two commands which you've suggested me. after compiling process there is no error and the end of log.Allwmake is like below: /src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed -Xlinker --no-as-needed Make/linux64Gcc46DPOpt/yPlusRAS.o -L/home/amir/OpenFOAM/OpenFOAM-1.6-ext/lib/linux64Gcc46DPOpt \ -lincompressibleTransportModels -lincompressibleRASModels -lbasicThermophysicalModels -lspecie -lcompressibleRASModels -lfiniteVolume -lmeshTools -lsampling -lOpenFOAM -liberty -ldl -lm -o /home/amir/OpenFOAM/OpenFOAM-1.6-ext/applications/bin/linux64Gcc46DPOpt/yPlusRAS is everything ok? and also i installed paraview by command :sudo apt-get install paraview but when i type paraFoam terminal display: amir@amir-VPCF22CFX:~/OpenFOAM/OpenFOAM-1.6-ext/tutorials/incompressible/simpleFoam/pitzDaily$ paraFoam created temporary 'pitzDaily.OpenFOAM' void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Calculator" under id 119 "Histogram" under id 134 void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Integrate Variables" under id 135 void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Intersect Fragments" under id 145 vGlobal Variables Over Time" under id 137 void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot On Sorted Lines" under id 139 "Threshold" under id 123 void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Warp By Vector" under id 127 bytesRead < bytesLeft bytesRead 0 bytesLeft512 Read float past end of buffer is there any problem? thanks a lot for your attention sincerely yours arjang |
|
February 13, 2013, 05:19 |
|
#7 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Arjang,
you didn't need to do: Code:
sudo apt-get install paraview But anyway, try the following steps: Code:
foam sed -i -e 's=\.OpenFOAM=\.foam=' bin/paraFoam Code:
paraFoam Bruno
__________________
|
|
February 13, 2013, 16:05 |
openfoam-1.6.ext installation problem
|
#8 |
Member
Arjang Behnoud
Join Date: Oct 2012
Posts: 61
Rep Power: 13 |
hi Bruno
I did those two commands and now paraFoam command works. but there is some red text at terminal after performing paraFoam command: void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Calculator" under id 121 void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Annotate Time Filter" under id 156 void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Calculator" under id 121 void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Clip" under id 123 void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Contingency Statistics" under id 150 void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Contour" under id 122 what are these red text? i asked this question because these red text does not appear when i use openFoam 2.1.1 thanks a lot sincerely yours arjang |
|
February 13, 2013, 16:24 |
|
#9 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Hi Arjang,
I think you can safely ignore those messages. The only reason I can deduce for the differences between OpenFOAM 2.1.1 and 1.6-ext, is because 2.1.1 uses ParaView 3.12.0 and Ubuntu's version is ParaView 3.14.1. Best regards, Bruno
__________________
|
|
February 14, 2013, 04:38 |
appreciation
|
#10 |
Member
Arjang Behnoud
Join Date: Oct 2012
Posts: 61
Rep Power: 13 |
hi Dear Bruno
thanks a lot for your tips. best regards arjang |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[OpenFOAM.com] OpenFOAM 1.7.1 installation on LINUX UBUNTU 10.10 | electrosin | OpenFOAM Installation | 40 | May 31, 2016 05:11 |
[Discussion] Restructuring the Installation page at openfoamwiki.net | wyldckat | OpenFOAM Installation | 16 | November 2, 2013 11:43 |
Openfoam 2.1 installation in ubuntu 12.04 | jsm | OpenFOAM Installation | 11 | May 7, 2012 04:56 |
Installation of OpenFOAM 1.7.1 to OprnSUSE 11.2 | superfxfund | OpenFOAM Installation | 3 | November 11, 2010 02:15 |
Some Query on Installation of OpenFoam | lzgwhy | OpenFOAM Installation | 1 | July 15, 2009 03:20 |