[mahaputra]

Originally Posted by marico

Hi All,

I compiled the 1.5-dev and tryed to use it with ThirdParty binaries. paraFoam didn't work even after recompiling paraview and parafoam. the error message I got was sth. like:
paraview: command not found

After that I searched a little bit and found out, that the foam/etc/apps/paraview3/bashrc differs from the one in original 1.5 release:

The line here is:
export Paraview_INST_DIR=$WM_THIRD_PARTY_DIR/ParaView-$ParaView_VERSION

compared to the original one:
export Paraview_INST_DIR=$WM_THIRD_PARTY_DIR/ParaView$ParaView_VERSION

that lead to the wrong environmental variables. Maybe this helps someone or someone could explain why it is defined differently.

Marco

Hi all



i just installed OpenFOAM-1.5-dev into another user/second user (not administrator user) and succeed to run OpenFOAM-1.5-dev


in my administrator user i installed OpenFOAM-1.5, and was succeed by using Jure Installation Script for OpenFOAM 1.5 including it's Paraview on ThirdParty Package),



i tries several ways to install paraview in second user (OpenFOAM-1.5-dev), but didnt help


1. by using ThirdParty.General_2008-12-11.tgz, from http://powerlab.fsb.hr/ped/kturbo/OpenFOAM/release/ , ./Allwmake not help

2. download the ThirdParty from Official OpenFOAM website, doesnt help, install manually , 1) unpack openfoam-1.5-dev, openfoam-1.5-linuxGccDPOpt, thirdparty.general, thirdparty.linuxGcc

3. using Jure installation script for the paraview installation , http://www.cfd-online.com/Forums/ope...-script-3.html

4.

follow this thread http://www.cfd-online.com/Forums/ope...d-regions.html, and http://www.cfd-online.com/Forums/ope...foam15dev.html

In building Paraview3, there is probably a misprint in the file ~/OpenFOAM/OpenFOAM-1.5-dev/etc/apps/paraview3/bashrc. The the path should be written as follows (not containing the line between ParaView and $):

export ParaView_INST_DIR=$WM_THIRD_PARTY_DIR/ParaView$ParaView_VERSION.


and so on


do you know, how to solve this problem?




this is the error message:


simulation15@user-laptop:~/OpenFOAM/simulation15-1.5-dev/run/tutorials/icoFoam/cavity$ paraFoam
/home/simulation15/OpenFOAM/OpenFOAM-1.5-dev/bin/paraFoam: 103: paraview: not found
simulation15@user-laptop:~/OpenFOAM/simulation15-1.5-dev/run/tutorials/icoFoam/cavity$ paraview
The program 'paraview' is currently not installed. To run 'paraview' please ask your administrator to install the package 'paraview'
bash: paraview: command not found
simulation15@user-laptop:~/OpenFOAM/simulation15-1.5-dev/run/tutorials/icoFoam/cavity$


could anyone help me how to install paraview in second linux (ubuntu 8.10) user?