|
[Sponsors] |
November 14, 2012, 10:19 |
Slant edges in blockMesh
|
#1 |
Member
Nikunj Raithatha
Join Date: Jul 2012
Location: Washington DC
Posts: 47
Rep Power: 13 |
Hello All!
I have this questions which has been bugging me from quite sometime now. I think many of you might find it very trivial. So attached with this post is blockMeshDict for a very simple square box. The image following the box is that of a slice of the volume. I dont understand despite defining all block such that all the local axes are aligned along the real x, y, z coordinates, why am I getting those slanting edges for every cell? BlockMesh: /*--------------------------------*- C++ -*----------------------------------*\ | ========= | | | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox | | \\ / O peration | Version: 2.1.1 | | \\ / A nd | Web: www.OpenFOAM.org | | \\/ M anipulation | | \*---------------------------------------------------------------------------*/ FoamFile { version 2.0; format ascii; class dictionary; object blockMeshDict; } // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // convertToMeters 1; vertices ( (0 0 0) (10 0 0) (10 5 0) (0 5 0) (0 0 10) (10 0 10) (10 5 10) (0 5 10) ); blocks ( hex (0 1 2 3 4 5 6 7) (20 10 20) simpleGrading (1 1 1) ); edges ( ); boundary ( floor { type wall; faces ( (1 5 4 0) ); } ceiling { type wall; faces ( (3 7 6 2) ); } fixedWalls { type wall; faces ( (0 4 7 3) (2 6 5 1) (0 3 2 1) (4 5 6 7) ); } ); mergePatchPairs ( ); // ************************************************** *********************** // |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh sticking point | natty_king | OpenFOAM Meshing & Mesh Conversion | 11 | February 20, 2024 09:12 |
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell | Arman_N | OpenFOAM Meshing & Mesh Conversion | 1 | May 20, 2019 17:16 |
[snappyHexMesh] sHM layer process keeps getting killed | MBttR | OpenFOAM Meshing & Mesh Conversion | 4 | August 15, 2016 03:21 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |