|
[Sponsors] |
[Gmsh] multiply then translate/totate a mesh ? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 11, 2016, 05:33 |
multiply then translate/totate a mesh ?
|
#1 |
Member
AdOo
Join Date: Mar 2016
Location: Bordeaux
Posts: 91
Rep Power: 10 |
Hi all,
I'm new in CFD, the only mesher I've ever used for the moment is blockMesh. I've to mesh a case (posted on photo below) which is a kind of 9 repetition of a same shape (a pipe). Here are my questions : FIRST I've already mesh a part of the geometry (one of the 9 pipes) with blockMesh. There's a photo below. I would like to know if there's a possibility with OpenFoam to copy/translate/rotate this mesh in order to make my entire mesh ?? (Because my external faces are squares, the merge should be possible...) SECOND Do you know if Gmsh can make 3d boudary layers in order to mesh my case ? I would like to make boundary layers on pipes then a tetrahedral on the rest of the domain. Thank you for your help |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
[snappyHexMesh] Creating multiple multiple cell zones with snappyHexMesh - a newbie in deep water! | divergence | OpenFOAM Meshing & Mesh Conversion | 0 | January 23, 2019 04:17 |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
[snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 09:03 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |