CFD Online Logo CFD Online URL
Home > Forums > Open Source Meshers: Gmsh, Netgen, CGNS, ...

hex mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 16, 2010, 10:54
Default hex mesh
Senior Member
Join Date: Feb 2010
Posts: 213
Rep Power: 10
vaina74 is on a distinguished road
I have two questions, I think they are two questions connected to each other.

1. My aim is to study the performance of a 'hydro' foil with OpenFOAM (and later on a propeller) and I'm going to create the computational domain with Salome. I'm an absolute beginner, so I proceed step by step. I made a simple model: a parallelepiped cutted by a cylinder; then partitioned by two planes (look at the picture). I'm trying to build a hexahedral mesh but i only obtain the message 'Unexpected geometry. Wrong number of wires' or similar. Can you help me, please?

2. I tried to 'translate' in GUI language the TUI tutorial about the hex mesh for a cylindric domain (on Salome). I almost made the grade (sic!) but I have some problems about 1D discretization. I can't set a different number of segments for each 'dimension', as in the tutorial. Maybe I'm wrong with the 'side group' (are face_a and face_b the bases of the cylinder?). My parameters are

[whole object]
hypotheses: nb Segments = 1;
algo: regular_1D; quadrangle_2D; hexa_3D;

[face a, face b]
hypotheses: nb Segments 1 = na, nb;
algo: regular_1D; quadrangle_2D;

[side group]
hypotheses: nb Segments =nl;
algo: regular_1D; quadrangle_2D;
Attached Images
File Type: jpg img.jpg (20.7 KB, 20 views)
vaina74 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pure hex mesh with snappy alf23 OpenFOAM Native Meshers: snappyHexMesh and Others 17 February 17, 2013 15:24
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM kawamatt2 ANSYS Meshing & Geometry 17 December 20, 2011 12:45
CheckMeshbs errors ivanyao OpenFOAM Running, Solving & CFD 2 March 11, 2009 03:34
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10
dynamic (hex) mesh daniel FLUENT 3 July 20, 2005 08:32

All times are GMT -4. The time now is 06:52.