[thyxxx]

Hello,

I have a problem to import a mesh-file (*.msh), which I created in Ansys Icem CFD, to OpenFoam.

Basically, the mesh describes two circular tubes sticked together like a T-Junction.
When I use the "mshToFoam <*.msh-file>"-command, I receive the following ERROR:




1 /*---------------------------------------------------------------------------*\
2 ========= |
3 \\ / F ield | OpenFOAM: The Open Source CFD Toolbox
4 \\ / O peration | Version: 1.7.1
5 \\ / A nd | Web: www.OpenFOAM.com
6 \\/ M anipulation |
7 -------------------------------------------------------------------------------
8
...
19
20 //*****************************************//
21 Create Time
22
23 Trying to read 1128683573 tets.
24
25 Segmentation fault






I have no idea why I receive the "Segmentation fault"-Error, which mistake causes the Error OR where I have to search for the mistake.

I already checked the memory, and there should be enough memory to handle this conversion. This should not be the reason.

I found this following Error-description which could have the same origin:
http://www.openfoam.com/mantisbt/vie...d=104#bugnotes

But honestly, it doesn't help me to fix the Problem.


Does somebody have an idea what to do to find the mistake resp. solve the problem? Perhaps somebody had this problem before and knows how to fix it?
I really need to import this mesh into OpenFoam and run simulations ...!

Many thx