|
[Sponsors] |
[snappyHexMesh] Snappy and baffles / cyclic BC's |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 11, 2013, 15:41 |
Snappy and baffles / cyclic BC's
|
#1 |
Senior Member
Charles
Join Date: Apr 2009
Posts: 185
Rep Power: 18 |
From the documents that I have read, since 2.2.0 one can use snappyHexMesh to create internal baffle surfaces or surfaces for cyclic boundary conditions directly. The documents say that:
refinementSurfaces { heater { level (0 0); faceZone heater; // Create baffles for all faces on the surface faceType baffle; cellZone heater; cellZoneInside inside; } } should work. However, in my case, I just have a single "disk" surface that I want to use for an actuator disk boundary condition - basically similar to the fan tutorial, using cyclic boundary conditions. My surface is not closed, therefore the cellZone statements have no meaning, and I have omitted them. I will deal with the fan pressure jump BC when I get to it, but right now snappy is simply not giving me the surface as a faceZone or boundary. Any advice from anybody who has done this? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
[snappyHexMesh] Baffles snappyhex | praveensrikanth91 | OpenFOAM Meshing & Mesh Conversion | 0 | May 9, 2015 21:05 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |