CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion > OpenFOAM Mesh Utilities

gmshFoam utility

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 8, 2010, 04:44
Default gmshFoam utility
New Member
Zubair Maalick
Join Date: Dec 2010
Posts: 1
Rep Power: 0
zubair.maalick is on a distinguished road
I am using OpenFoam-1.6 and need to use gmshFoam utility to convert gmsh geometry to openFoam.

to Install gmshFoam I have followed following link:

The problem I am getting is:
after ./Allwmake command I have received following error:


&, const Foam::Xfer<Foam::List<int> >&, bool)
/home/openfoam/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude/polyMesh.H:219: note: Foam:olyMesh:olyMesh(const Foam::IOobject&)
/home/openfoam/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude/polyMesh.H:166: note: Foam:olyMesh:olyMesh(const Foam:olyMesh&)
polyMeshConversion/polyMeshConversion.C: In member function ‘Foam:olyMeshConversion* Foam:olyMeshConversion::renumberedMesh(Foam::lab el) const’:
polyMeshConversion/polyMeshConversion.C:231: error: ‘allFaces’ was not declared in this scope
polyMeshConversion/polyMeshConversion.C:264: error: ‘allPoints’ was not declared in this scope
make: *** [Make/linuxGccDPOpt/polyMeshConversion.o] Error 1
zubair.maalick is offline   Reply With Quote



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sample Utility not working in OpenFoam 1.6 titio OpenFOAM Post-Processing 6 November 15, 2014 19:04
problem with sampling Utility in openFOAM 1.6 carmir OpenFOAM Post-Processing 10 February 26, 2014 03:00
How to compile a new utility rudy OpenFOAM 4 October 1, 2011 22:48
StreamFunction utility titio OpenFOAM Post-Processing 0 May 19, 2010 16:04
Sample Utility not working in OpenFoam 1.6 titio OpenFOAM Post-Processing 0 February 5, 2010 13:12

All times are GMT -4. The time now is 17:00.