|
[Sponsors] |
[snappyHexMesh] Problem with the turbineSiting tutorial and snappyHexMesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 28, 2013, 05:32 |
Problem with the turbineSiting tutorial and snappyHexMesh
|
#1 |
New Member
Join Date: Jun 2013
Posts: 1
Rep Power: 0 |
Hello everyone!
I'm a student and a new user of OpenFoam. I am currently trying to adapt the turbineSiting tutorial from OpenFoam 2.2.0 to my own terrain for a study. I think to have properly adapted the blockMeshDict file for my simulation and the snappyHexMeshDict file too. The problem is when I launch the Allrun file from my terminal I receive this message : Running snappyHexMesh in parallel on /home/neapoli/OpenFOAM/neapoli-2.2.0/run/tutorials/incompressible/simpleFoam/Desaru using 4 processes cp: target `./processor0/0/' is not a directory cp: target `./processor1/0/' is not a directory cp: target `./processor2/0/' is not a directory cp: target `./processor3/0/' is not a directory I observed from the turbineSiting tutorial that those missing files should be created after launching the Allrun script but it doesn't seems to work with my project. For this study I just created a copy of the turbineSiting folder in the simpleFoam folder so I assume that it should work correctly. So if anybody have clue about what is going on with my project I'll be glad to hear it. Thank you in advance! PS: this is my first time asking a question on this kind of forum, so if I have forgot something do not hesitate to tell me what. |
|
Tags |
turbinesiting |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Problem in results with snappyHexMesh between refinement levels | Phil_WO | OpenFOAM Meshing & Mesh Conversion | 2 | November 8, 2018 04:49 |
[snappyHexMesh] snappyHexMesh problem | cfdsolver1 | OpenFOAM Meshing & Mesh Conversion | 0 | June 23, 2016 11:09 |
[snappyHexMesh] Tutorial crashes: snappyHexMesh floating point exception. | jasv | OpenFOAM Meshing & Mesh Conversion | 4 | May 10, 2016 03:55 |
troubles with turbineSiting tutorial | cedrik | OpenFOAM Running, Solving & CFD | 1 | October 5, 2014 06:54 |
Using turbineSiting Tutorial for a 2D model | bathgooner | OpenFOAM Running, Solving & CFD | 0 | March 14, 2012 14:35 |