Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[mesh manipulation] Creating an openfoam mesh for paraview using openfoam designer?

Updated Threads

Like Tree

2Likes

1 Post By mihai.racheru
1 Post By wyldckat

Search this Thread

Prev

Previous Post

Next Post

Next

April 9, 2014, 21:16	Creating an openfoam mesh for paraview using openfoam designer?	#1
massive_turbulence Senior Member Andrew Somorjai Join Date: May 2013 Posts: 175 Rep Power: 13	So far I tried this much. I used the template called cavity inside the icofoam folder and copied it to a folder called CFD. I then tried to create the mesh by doing mesh utilties->generation->blockmesh-> right click and start which generates these files inside of constant/polymesh/ boundary, faces, neighbour, owner, points now I'm not sure how to generate a .foam file to open in paraview, any ideas?

Tags

mesh generation, open foam, paraview

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
[blockMesh] Creating Mesh Using SSIIM2 to OpenFoam	manuelffonseca	OpenFOAM Meshing & Mesh Conversion	2	January 10, 2017 14:31
[Commercial meshers] Creating GAMBIT mesh as multi-region for chtMultiRegion*Foam in OpenFOAM	sa har	OpenFOAM Meshing & Mesh Conversion	1	April 20, 2015 07:40
[Netgen] Problems creating OpenFOAM mesh with Netgen	sur4j	OpenFOAM Meshing & Mesh Conversion	1	March 22, 2014 17:03
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11

All times are GMT -4. The time now is 01:08.