CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[blockMesh] compartment fire meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 5, 2014, 16:06
Default compartment fire meshing
  #1
New Member
 
abtin
Join Date: Feb 2014
Posts: 1
Rep Power: 0
abtin_c4 is on a distinguished road
hi dear foamers
i want to simulate compartment fire caused by a fuel source which is at some height from the compartment floor. my main challenge is in generating mesh via blockMesh for this problem. by "cell correspondence" approach toward this case, if i assume the fuel source, a patch that fuel flows through it, what kind of patch should i use for the top face of the block located below the fuel source patch??
2.jpg

1.jpg

3.jpg
i repeatedly face the warning/Error that tells there are for example 9 undefined faces which the software categorize them as default faces of type empty
thanks in advance
abtin_c4 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Meshing Process sidharth9426 STAR-CCM+ 4 September 15, 2015 03:31
[ICEM] Flow channel meshing problems StefanG ANSYS Meshing & Geometry 19 May 15, 2012 06:44
[ANSYS Meshing] Meshing strategy for External Flows Hybrid ANSYS Meshing & Geometry 0 January 24, 2012 14:27
Best Meshing scheme for Cylinder Nutrex Main CFD Forum 4 July 29, 2008 11:03


All times are GMT -4. The time now is 08:28.