|
[Sponsors] |
[snappyHexMesh] snappyHexMesh mesh not appearing in paraFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 4, 2015, 22:08 |
snappyHexMesh mesh not appearing in paraFoam
|
#1 |
New Member
Join Date: Jun 2015
Posts: 12
Rep Power: 10 |
Hello everyone! I'm Liz, and I am very new to OpenFOAM, so please excuse me if I made a very obvious mistake. I am working on a project that requires me to model the approximate flow from a helicopter. I am using the pimpleDyMFoam tutorial "propeller" as a model, as I need to get the helicopter rotors rotating above the static fuselage. I have .obj and .stl files for all my model components and have run snappyHexMesh several times successfully. However, all I can ever see in paraFoam is the original mesh from blockMesh.
I know this question has come up several times on the forum but the solutions proposed there have not resolved my problem. I've tried moving the locationInMesh point around, running with and without -overwrite, and switching from .obj files to .stl files (this gave me an error with snappyHexMesh saying stl was not an accepted file type - I'm still confused by this since I have made a mesh with an stl before...). I've attached all the relevent dictionaries and the snappyHexMesh log, I'd really appreciate it if someone could take a look and point out anything that looks wrong. I'm still learning how everything works together and probably have several mistakes besides whatever is causing this problem. Thanks! |
|
Tags |
dynamic meshing, parafoam, snappyhexmesh |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Failed 10 mesh checks after snappyHexMesh | jet_engine | OpenFOAM Meshing & Mesh Conversion | 9 | November 21, 2016 13:37 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[snappyHexMesh] snappyHexMesh & Mesh around a missile | sasanghomi | OpenFOAM Meshing & Mesh Conversion | 2 | October 15, 2014 19:54 |
[snappyHexMesh] snappyHexMesh: No layer at the outer surfaces of the mesh | Jane L | OpenFOAM Meshing & Mesh Conversion | 1 | September 13, 2012 08:38 |
[snappyHexMesh] SnappyHexMesh not generate mesh first time | mavimo | OpenFOAM Meshing & Mesh Conversion | 4 | August 26, 2008 07:08 |