[Other] Create 3D mesh of a die

flum · February 3, 2016, 16:32

Hi guys, I need to create a 3d mesh starting from a 3d CAD file (I'm using solidworks).
What mesh software can I use for my goal?
Can you advice me some books to read about this matter?

I'm very new at CFD, I'm trying to simulate a very viscous fluid (like the plastiline) extruded through a die, do you think with CFD can I obtain some realistic results?

Anyway, my first question is relative to know how create my first 3d mesh starting from a cad.

Thanks

Artur · March 12, 2016, 10:59

Hi,

I'm afraid I cannot help with the very viscous part, but regarding meshing you have several options.
1. if your geometry is complex, you probably want an unstructured mesher, like OF native snappyHexMesh, which requires an stl to represent the CAD model; you could also look at engrid which is free
2. if your geometry is simple you could try meshing it with a structured hexahedral grid using blockMesh, although that doesn't require a CAD model, rather a description of points. This is generally the most tricky way
3. use a commercial tool, like Pointwise, GridPro, Hexpress, etc. which should work with either a step or an iges. These are quite expensive to obtain so if you don't have access to a licence you probably don't want to go this way.

All the best,

A

February 3, 2016, 16:32	Create 3D mesh of a die	#1
flum New Member Join Date: Jan 2016 Posts: 2 Rep Power: 0	Hi guys, I need to create a 3d mesh starting from a 3d CAD file (I'm using solidworks). What mesh software can I use for my goal? Can you advice me some books to read about this matter? I'm very new at CFD, I'm trying to simulate a very viscous fluid (like the plastiline) extruded through a die, do you think with CFD can I obtain some realistic results? Anyway, my first question is relative to know how create my first 3d mesh starting from a cad. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit problems	Althea	FLUENT	22	January 4, 2017 03:19
[Gmsh] 3D coil mesh: can't create the volume?	RomainBou	OpenFOAM Meshing & Mesh Conversion	3	July 18, 2016 05:09
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
[snappyHexMesh] Layers:problem with curvature	giulio.topazio	OpenFOAM Meshing & Mesh Conversion	10	August 22, 2012 09:03
Where's the singularity/mesh flaw?	audrich	FLUENT	3	August 4, 2009 01:07

March 12, 2016, 10:59		#2
Artur Senior Member Artur Join Date: May 2013 Location: Southampton, UK Posts: 372 Rep Power: 19	Hi, I'm afraid I cannot help with the very viscous part, but regarding meshing you have several options. 1. if your geometry is complex, you probably want an unstructured mesher, like OF native snappyHexMesh, which requires an stl to represent the CAD model; you could also look at engrid which is free 2. if your geometry is simple you could try meshing it with a structured hexahedral grid using blockMesh, although that doesn't require a CAD model, rather a description of points. This is generally the most tricky way 3. use a commercial tool, like Pointwise, GridPro, Hexpress, etc. which should work with either a step or an iges. These are quite expensive to obtain so if you don't have access to a licence you probably don't want to go this way. All the best, A