 |
 |
 |
|
|
|
[Sponsors] | ||||
October 26, 2016, 05:17
|
removal of patchfield entry
|
#1 |
|
New Member
Erlend Grotle
Join Date: Jul 2016
Posts: 12
Rep Power: 9  |
Hi,
I have a problem which I find difficult to solve. For some reason, I need to run my cases on version 3.0.0 of OpenFOAM. I use my cases from newer versions. The case is a tank with special form, with geometry as .stl file. I make a big box and use snappyHexmesh to cut out the inner tank. This have worked fine on the other version. The mesh is still created now, but seems to keep the patch entry in blockMesh. I get the error: --> FOAM FATAL IO ERROR: Cannot find patchField entry for allBoundary I really can not figure out how to resolve this, and think it might be related to the difference in versions, but 3.0.0 is not that old. Any help is much appreciated ! BR Erlend |
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help with if statement | CHARLES | OpenFOAM Programming & Development | 17 | August 22, 2021 03:14 |
| Parallel snappyHexMesh problem: Cannot find patchField entry for procBoundary2to7 | hconel | OpenFOAM Pre-Processing | 0 | October 5, 2018 17:22 |
| Patchfield Entry | jhanson2 | OpenFOAM Running, Solving & CFD | 1 | September 27, 2017 01:29 |
| adding compressible option to ptot | immortality | OpenFOAM Programming & Development | 13 | June 15, 2015 15:00 |
| [Other] Cannot find patchField entry for walls | eruwaedhiel | OpenFOAM Meshing & Mesh Conversion | 0 | June 8, 2015 22:57 |
Threaded Mode
