|
[Sponsors] |
[snappyHexMesh] Background Mesh generation for SnappyHex |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 12, 2018, 12:53 |
Background Mesh generation for SnappyHex
|
#1 |
New Member
Join Date: Jun 2018
Posts: 1
Rep Power: 0 |
Hi!
I am new to OpenFoam and I've been struggling for a couple of days now to understand how a BG mesh is generated for SnappyHex meshing. I am working on a 3D model, and as far as I understand my BG mesh has to be a box which contains the whole 3D geometry. However, part of my geometry is just not converted, although if I look at it in my external mesher (I use CFX mesher), the geometry is fully included in the box which I use to generate BG mesh. Any ideas where am I going wrong? Thanks in advance. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 08:38 |
State of mesh generation | Wandadars | Main CFD Forum | 3 | January 5, 2017 13:51 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 10:38 |
Overset: refine background mesh without resetting the mesh | JohnAB | STAR-CCM+ | 6 | May 19, 2014 14:48 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |