[snappyHexMesh] Mesh/grid Independence study with sHM

Sunsheep · July 22, 2018, 09:35

Hi guys,

I got some questions about the mesh/grid Independence study with snappyHexMesh (sHM):

- How do you archive a mesh independence solution with sHM?

- Only adjust the cell size of the backgroundMesh?

- Playing around with the levels inside the sHMDict?

- Working with refinement boxes etc.?

- A mix of these three ways?

- Or is there another way?

Thank you for your answers.

Sunsheep

MTomić · November 1, 2024, 12:09

Dear Foamers,

Many years later, I hope to revive this thread.

Has anyone had any success in creating a generalized workflow for conducting grid independence studies using snappyHexMesh?

Some general tips, like increasing the 3D background mesh by a factor of 1.5 instead of 2 ( $2^{3} >> 1.5^{3}$ ) and using the representative cell length as opposed to the number of cells in the domain, etc... would be appreciated as well.

How many of you generally use the Richardson extrapolation in the process as well?

July 22, 2018, 09:35	Mesh/grid Independence study with sHM	#1
Sunsheep New Member anonymous Join Date: Sep 2017 Posts: 3 Rep Power: 9	Hi guys, I got some questions about the mesh/grid Independence study with snappyHexMesh (sHM): - How do you archive a mesh independence solution with sHM? - Only adjust the cell size of the backgroundMesh? - Playing around with the levels inside the sHMDict? - Working with refinement boxes etc.? - A mix of these three ways? - Or is there another way? Thank you for your answers. Sunsheep Last edited by Sunsheep; July 22, 2018 at 09:38. Reason: - formating

November 1, 2024, 12:09		#2
MTomić New Member Matej Tomić Join Date: Jul 2022 Posts: 5 Rep Power: 5	Dear Foamers, Many years later, I hope to revive this thread. Has anyone had any success in creating a generalized workflow for conducting grid independence studies using snappyHexMesh? Some general tips, like increasing the 3D background mesh by a factor of 1.5 instead of 2 ( $2^{3} >> 1.5^{3}$ ) and using the representative cell length as opposed to the number of cells in the domain, etc... would be appreciated as well. How many of you generally use the Richardson extrapolation in the process as well? __________________ Regards, Matej Last edited by MTomić; November 1, 2024 at 12:10. Reason: Formatting

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mesh independence study for transient simulation	snejball91	CFX	9	November 17, 2022 01:12
[ICEM] Mesh Independence study	Carlos Modesto	ANSYS Meshing & Geometry	4	July 7, 2017 06:57
Transient mode simulation (VoF model) mesh independence study problem	yulu	FLUENT	4	September 20, 2016 17:30
Mesh Independence Study	beyonder1	CFX	1	October 1, 2015 10:57
Need for Mesh Independence Study	nickninevah	Main CFD Forum	6	October 15, 2010 17:25