CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Commercial meshers] Creating a 2D Mesh with Ansys Workbench for OpenFOAM v1912

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 2, 2020, 04:30
Arrow Creating a 2D Mesh with Ansys Workbench for OpenFOAM v1912
  #1
Member
 
Join Date: Oct 2011
Posts: 49
Rep Power: 14
fanta is on a distinguished road
Hi,
i am stuck with a problem and thought i would like to ask here in the OpenFOAM Sub-Forum instead of asking at the Ansys Meshing Forum.


I want to create a 2D study in OpenFOAM. How do i mesh it with Ansys? There is no z-direction. As far as i understand for OpenFOAM 2D studies are 3D with one cell in z-direction (in my case its the z-direction). So I need a 3D body, since i have to name the faces for the boundary conditions. But how do i mesh with Ansys, I don't know how it can be done with Ansys Workbench.
fanta is offline   Reply With Quote

Old   April 2, 2020, 16:49
Default
  #2
HPE
Senior Member
 
HPE's Avatar
 
Herpes Free Engineer
Join Date: Sep 2019
Location: The Home Under The Ground with the Lost Boys
Posts: 932
Rep Power: 12
HPE is on a distinguished road
I think ANSYS forum is a better place to find an answer to this Q.
HPE is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Workbench] Error creating mesh by using ANSYS workbench newbie384 ANSYS Meshing & Geometry 7 January 14, 2021 00:59
decomposePar problem: Cell 0contains face labels out of range vaina74 OpenFOAM Pre-Processing 37 July 20, 2020 05:38
[Workbench] Ansys Workbench mesh problem engeagle ANSYS Meshing & Geometry 0 March 21, 2016 10:22
[mesh manipulation] Importing Multiple Meshes thomasnwalshiii OpenFOAM Meshing & Mesh Conversion 18 December 19, 2015 18:57
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20


All times are GMT -4. The time now is 18:35.