[mesh manipulation] Dynamic remeshing in OpenFOAM-8/9

dhrumilganatra · September 14, 2021, 03:02

I am working on a flow control valve where I am using sixDoFRigidBodyMotion for transient studies along with dynamicFvMesh. However, the smoothing option is not adequate and it fails after some time steps due to high skewness of cells. Is there any option to remesh the domain dynamically to control the mesh quality?

Umut · July 21, 2024, 06:25

Any update/solution on this? I'm also looking for a remeshing solution.

I thought adaptive mesh refinement governed by local cell size, combined with mesh motion can be a way to do that, but I wasn't able to use AMR along side with dynamic mesh.

AtoHM · July 21, 2024, 17:29

Doesn't high displacement always lead to a bad cell quality not matter what level you have? I assume for large displacements the only "real" solution is overset (Chimera meshes), which is available in the ESI branch of OpenFOAM.

Umut · July 21, 2024, 19:25

In short, remeshing adds cells, instead of streching existing ones too much, which does not lead to bad cells. Overset has its own disadvantages, too. Therefore, if there is a way to apply remeshing in OF, either directly or even a workaround, I am interested to learn.

September 14, 2021, 03:02	Dynamic remeshing in OpenFOAM-8/9	#1
dhrumilganatra New Member Dhrumil Ganatra Join Date: Jul 2020 Posts: 1 Rep Power: 0	I am working on a flow control valve where I am using sixDoFRigidBodyMotion for transient studies along with dynamicFvMesh. However, the smoothing option is not adequate and it fails after some time steps due to high skewness of cells. Is there any option to remesh the domain dynamically to control the mesh quality?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Getting Started with OpenFOAM	wyldckat	OpenFOAM	26	June 21, 2024 06:54
Remeshing in OpenFOAM	prasanth	OpenFOAM	1	October 7, 2017 17:41
OpenFOAM Training Jan-Apr 2017, Virtual, London, Houston, Berlin	cfd.direct	OpenFOAM Announcements from Other Sources	0	September 21, 2016 11:50
OpenFOAM Training, London, Chicago, Munich, Houston 2016-2017	cfd.direct	OpenFOAM Announcements from Other Sources	0	September 14, 2016 03:19
How to Us Dynamic Mesh in OpenFOAM	lzgwhy	OpenFOAM Programming & Development	4	November 6, 2009 05:18

July 21, 2024, 06:25		#2
Umut New Member Umut Join Date: May 2011 Posts: 7 Rep Power: 15	Any update/solution on this? I'm also looking for a remeshing solution. I thought adaptive mesh refinement governed by local cell size, combined with mesh motion can be a way to do that, but I wasn't able to use AMR along side with dynamic mesh.

July 21, 2024, 17:29		#3
AtoHM Senior Member M Join Date: Dec 2017 Posts: 679 Rep Power: 12	Doesn't high displacement always lead to a bad cell quality not matter what level you have? I assume for large displacements the only "real" solution is overset (Chimera meshes), which is available in the ESI branch of OpenFOAM.

July 21, 2024, 19:25		#4
Umut New Member Umut Join Date: May 2011 Posts: 7 Rep Power: 15	In short, remeshing adds cells, instead of streching existing ones too much, which does not lead to bad cells. Overset has its own disadvantages, too. Therefore, if there is a way to apply remeshing in OF, either directly or even a workaround, I am interested to learn.