|
[Sponsors] |
October 18, 2021, 11:41 |
Converting mesh from Fluent 21.1
|
#1 |
Member
Join Date: Jun 2016
Posts: 99
Rep Power: 9 |
Hello all,
I'm converting a fluent polyhedra mesh to OpenFOAM. I'm sure that fluent3DMeshToFoam works with Fluent 17.1 .cas file. Recently we have upgraded to ANSYS 2021 R1 and now fluent can only export to .cas.h5 or .cas.gz and none of them can be recognized by OpenFOAM. I even tried to use TUI with no luck Code:
/file> binary-legacy-files Write binary files? [yes] no /file> write-case Last edited by xuegy; October 18, 2021 at 12:48. |
|
October 18, 2021, 12:56 |
|
#3 |
Member
Join Date: Jun 2016
Posts: 99
Rep Power: 9 |
||
June 23, 2022, 03:56 |
|
#4 |
Member
mahdi
Join Date: Nov 2015
Location: Paris, France
Posts: 32
Rep Power: 10 |
Hi,
For someone who has the same problem, I have written the solution procedure here: Error in polyhedral-mesh (Fluent Meshing) conversion to OpenFOAM. Regards, |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lift and Drag pattern change wit FLUENT 16 and 13 PISO for same mesh n solver setting | arunraj | FLUENT | 0 | June 2, 2016 22:58 |
[Other] Pointwise Mesh into Fluent - Error: "Divergence detected in AMG solver: ads-0." | kyles.sverige | ANSYS Meshing & Geometry | 3 | January 27, 2015 12:28 |
[Commercial meshers] converting fluent mesh to OpenFOAM | sivakumar | OpenFOAM Meshing & Mesh Conversion | 2 | April 12, 2012 06:20 |
[ICEM] Any successful way of converting Fluent Mesh (academic) to a CAD model? | RossFS | ANSYS Meshing & Geometry | 2 | February 20, 2011 18:59 |
few quesions on ANSYS ICEMCFD and FLUENT | Prakash.Paudel | ANSYS | 0 | August 12, 2010 12:07 |