|
[Sponsors] |
[Commercial meshers] Fluent3dMeshToFoam error with Fluent mesh with internal walls |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 7, 2008, 09:40 |
Fluent3dMeshToFoam error with Fluent mesh with internal walls
|
#1 |
New Member
Jens Dahl Kunoy
Join Date: Mar 2009
Location: Denmark
Posts: 12
Rep Power: 17 |
Hi,
I'm trying to import a mesh from Gambit with 2 seperate internal 2D walls into OpenFoam. As I understand from the different threads in this forum, the easy way to do this is to import the .msh file in Fluent and immediatly thereafter save it as a .cas file. In that way 2 the grid information for 2 shadow walls are included. Afterwards I try to use the fluent3dMeshToFoam utility to make the final conversion to OpenFoam polymesh. Unfortunatly I get a number of errors "... : Do not understand characters: ...". I have tried to remove different sections in the .cas file and some errors went away. The last error that got me stuck was that "... Do not understand characters: ( ...". I have made a delimiter check that didn't showed any delimiter mismatch. Any ideas?? Regards Jens |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] Internal Walls in mesh | Rakkiran | OpenFOAM Meshing & Mesh Conversion | 6 | April 15, 2021 02:48 |
[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam) | Aadhavan | OpenFOAM Meshing & Mesh Conversion | 2 | March 8, 2018 01:47 |
Lift and Drag pattern change wit FLUENT 16 and 13 PISO for same mesh n solver setting | arunraj | FLUENT | 0 | June 2, 2016 22:58 |
Running UDF with Supercomputer | roi247 | FLUENT | 4 | October 15, 2015 13:41 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |