[mesh manipulation] OF-1.5-dev decomposePar

AnttiH · March 31, 2009, 03:42

Hi all,

Some reason i get "Segmentation fault" when using decomposePar in 1.5-dev version.
I trace the problem to line 289 in domainDecomposition.C (Program fails to create mesh Object).

Regards

Antti

kev4573 · April 2, 2009, 10:44

Does checkMesh run on your mesh?

bastil · April 2, 2009, 16:03

Note that decomposing tools changed today due to the parallelisation of ggi.

Regards.

AnttiH · April 3, 2009, 03:32

Quote:

Originally Posted by kev4573

Does checkMesh run on your mesh?

Yes i used checkMesh and result was OK. I ran decomposePar with OF-1.5 and calculated case with OF-1-dev and mpirun . It worked fine. Reconstruction worked also with 1.5-dev version (reconstructPar).

This seems litle strange, and i'm thinking if I have missed something
important.

March 31, 2009, 03:42	OF-1.5-dev decomposePar	#1
AnttiH New Member Antti Heikkilä Join Date: Mar 2009 Posts: 3 Rep Power: 17	Hi all, Some reason i get "Segmentation fault" when using decomposePar in 1.5-dev version. I trace the problem to line 289 in domainDecomposition.C (Program fails to create mesh Object). Regards Antti

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[foam-extend.org] install , openFOAM 1.5 dev	ronak	OpenFOAM Installation	2	August 25, 2017 14:08
OpenFOAM 1.5 dev	LVDH	OpenFOAM	98	May 5, 2010 17:01
[OpenFOAM] ParaView/ParaFoam in OpenFoam 1.5 dev	titio	ParaView	2	February 27, 2010 14:02
[OpenFOAM] Paraview/Parafoam in OpenFoam 1.5 dev	titio	ParaView	0	December 9, 2009 12:13
[OpenFOAM] Paraview/Parafoam in OpenFoam 1.5 dev	titio	ParaView	0	December 9, 2009 12:12

April 2, 2009, 10:44		#2
kev4573 Senior Member Kevin Smith Join Date: Mar 2009 Posts: 104 Rep Power: 17	Does checkMesh run on your mesh?

April 2, 2009, 16:03		#3
bastil Senior Member BastiL Join Date: Mar 2009 Posts: 530 Rep Power: 20	Note that decomposing tools changed today due to the parallelisation of ggi. Regards.