|
[Sponsors] |
[Commercial meshers] No Convergence with Fluent |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 12, 2009, 16:16 |
No Convergence with Fluent
|
#1 |
New Member
Arman
Join Date: Apr 2009
Posts: 1
Rep Power: 0 |
Hi Friends
I am modeling a large natural reservoir with fluent,First I used gambit and built the geomery and mesh.My mesh spacing is 20m size.it is tri pave mesh for faces and tgrid for my volume.I have only 3000 skewed elements and the meshing is now successfull.I have two inflows and an outflow.Now I am using fluent to find my steady state velocities after a flooding.I used all of the boundary conditions as walls,symetry for surfsce,velocity inlet,pressure outlet or outflow and others for my reservoir.But no one can model a real region because with no one my fluent can converge and the continuity equation allways have high residuals and cant converge.I dont know how should I determine my velocities.If anyone knows about the converging method in such a same case please help me, best regards, Arman. |
|
December 1, 2009, 23:25 |
|
#2 |
New Member
Dr Suvash C Saha
Join Date: Nov 2009
Posts: 24
Rep Power: 16 |
I am also facing similar problem............Anybody help?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
convergence problem regarding fluent | funkvps | FLUENT | 2 | June 2, 2018 02:26 |
Convergence of species in reacting flow on fluent | esi1520 | FLUENT | 0 | May 6, 2018 02:04 |
Divergence in Fluent 15 but convergence in Fluent 14.X | jeannotalpin | FLUENT | 1 | July 2, 2015 13:29 |
convergence problem with FLUENT cavitation model | Belete Kiflie | FLUENT | 3 | February 20, 2006 10:16 |
Standard convergence limit in FLUENT 6.1 | Henrik Ström | FLUENT | 3 | December 20, 2005 08:48 |