|
[Sponsors] |
April 17, 2023, 08:47 |
CheckMesh command with OpenFoam10
|
#1 |
New Member
Paolo Baj
Join Date: Mar 2023
Posts: 2
Rep Power: 0 |
Goodmorning everyone. I am using SnappyHexMesh to create a mesh for OpenFoam10. I would like to export some mesh quality indicators (such as skewness) on Paraview in order to be able to visualize the most problematic zones of the mesh. I wanted to do this operation using the command "checkMesh -writeAllFields" but it looks like the option "-writeAllFields" is not available anymore with openFoam10. Is there a method in order to being able to use this command with OpenFoam10? If not, can you suggest me an alternative method to check mesh quality?
|
|
April 17, 2023, 09:03 |
|
#2 |
Senior Member
Yann
Join Date: Apr 2012
Location: France
Posts: 1,068
Rep Power: 26 |
Hello Paolo,
If I'm not mistaken, the -writeAllFields option has never been implemented in the OpenFOAM foundation branch (openfoam.org), only in the ESI-OpenCFD branch (openfoam.com). You can use checkMesh -help to get help on the available options for the version you are currently using. I guess you will have to use something like "-writeSets <surfaceFormat>" Cheers, Yann |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] chekMesh is OK, but checkMesh with options indicates fails | mactone | OpenFOAM Meshing & Mesh Conversion | 2 | September 7, 2022 22:12 |
[Other] CheckMesh vs CheckMesh -allGeometry -allTopology | Nagesh Atreyas | OpenFOAM Meshing & Mesh Conversion | 2 | June 25, 2019 04:55 |
checkMesh / mesh errors | andybond13 | OpenFOAM Pre-Processing | 0 | June 10, 2015 13:05 |
[mesh manipulation] checkMesh Erros after refineMesh | mgdenno | OpenFOAM Meshing & Mesh Conversion | 10 | October 14, 2014 05:16 |
checkMesh Errors after refineMesh | mgdenno | OpenFOAM | 0 | July 30, 2012 21:39 |